This painted steel drop trailer axle features a 95 inch hub face, with a 100 inch overall measurement. With a 3500lb maximum capacity, this axle accommodates 5 Lug hubs or Brake Drums with the proper wheel bearings. Rockwell Axles are Made in the USA using the modern technology and precision manufacturing methods to produce the highest quality leaf spring axle on the market. This 2 3/8" round trailer axle mounts to your trailers leaf springs using u bolts and a leaf spring plate. We have multiple options of Leaf Spring U-Bolt Kits to choose from for mounting your axle and springs together. Depending upon your trailers needs, we offer Trailer Hubs and Trailer Bearing Protectors to complete your axle assembly. This steel Rockwell Brand Axle includes multiple features that are ideal for light duty utility trailers and freshwater boat trailers. Features:
-Includes Axle beam with spindles welded into the beam
-Painted Steel Axle Beam
-EZ Lube Greasing System. Grease the fitting on the tip of the spindle, grease exits through the rear port inside the grease seal, forcing old grease out, and new grease in.
-Includes Spindle Washer, Castle Nut, and Cotter Key
-Welded Standard 4 Hole Brake Flange for mounting drum brake backing plates or disc brake caliper brackets
-Drop axle has industry standard 4 inch drop spindles
-Spring Seats are welded onto axle beam at 80" on center. See below for spring seat measurements
Specs:
- Made of 2 3/8" round 3/16" thick steel tubing
-Tapered Spindle uses 1 1/16"(44649) Outer x 1 3/8"(68149) Outer Wheel Bearings
-Grease Seal Size 1.719" ID
-Hub Face: 95 inches
Hub Face is measured from the outside of one hubface, to the outside of the opposite hubface. Another common term for hub face is axle track.
-Overall Length (tip to tip): 100 inches
-Spring Seat Measurement: Will accommodate 80" Leaf Spring Center
The leaf spring center or spring seat refers to the measurement of your trailers leaf spring position in relation to your frame and as it mounts to the axle. This is determined by measuring from the center of one leaf spring, across the axle to the center of the other leaf spring. So center of driver side leaf spring, to the center of the passenger side leaf spring. Your leaf spring measurement must fall inside the above measurements in order to properly work with this axle length. Dexter has determined the acceptable ranges to ensure the proper rating of your axle, and the available room on the axle to mount leaf springs.
