<![CDATA[Trailer.Parts: ]]> https://www.trailer.parts Wed, 7 Oct 2026 00:00:00 EST en-us <![CDATA[12 inch Black Rubber Straight Boat Trailer Roller 5/8 inner diameter]]> https://www.trailer.parts/12-inch-Black-Rubber-Straight-Boat-Trailer-Roller-58-inner-diameter_p_5431.html Wed, 7 Oct 2026 00:00:00 EST This straight 12 inch Black Rubber Roller by Yates is designed to give the boater the ease of loading and unloading. Rollers will typically mount along the center line of the boat one cross members using 12 inch Galvanized Roller Bracket. To hold the...[Read More]
Our Price: $23.41 [Add to Cart]


]]> https://www.trailer.parts/12-inch-Black-Rubber-Straight-Boat-Trailer-Roller-58-inner-diameter_p_5431.html This straight 12 inch Black Rubber Roller by Yates is designed to give the boater the ease of loading and unloading. Rollers will typically mount along the center line of the boat one cross members using 12 inch Galvanized Roller Bracket. To hold the...[Read More]
Our Price: $23.41 [Add to Cart]


]]> This straight 12 inch Black Rubber Roller by Yates is designed to give the boater the ease of loading and unloading. Rollers will typically mount along the center line of the boat one cross members using 12 inch Galvanized Roller Bracket. To hold the roller into the bracket we offer a Stainless Steel Roller Shaft 13.5 inch long and a Zinc Plated Roller Shaft 13.5 in long 5/8 inch Diameter which run through the 5/8 inch bore in the 12 inch straight roller. Each end of the roller shaft would be secured by 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts.

This roller measures 2.5" in diameter. This bracket assembly is then bolted or u-bolted to the trailers cross-member. Make your measurements and check out our Boat Trailer U-Bolts and Trailer Bolts to pick out the correct galvanized or stainless u-bolt or bolt you need!

MADE IN THE USA!
]]> <![CDATA[3.5 inch Rubber Boat Trailer Roller End Cap 5/8 Bore]]> https://www.trailer.parts/35-inch-Rubber-Boat-Trailer-Roller-End-Cap-58-Bore_p_5432.html Wed, 7 Oct 2026 00:00:00 EST This 3.5 inch Black Rubber Roller cap is specifically designed as a protector for your boat. On a common roller assembly, you see a roller, held on by a roller shaft, which is secure inside the roller bracket. This may leave the bracket exposed on ei...[Read More]
Our Price: $9.69 [Add to Cart]


]]> https://www.trailer.parts/35-inch-Rubber-Boat-Trailer-Roller-End-Cap-58-Bore_p_5432.html This 3.5 inch Black Rubber Roller cap is specifically designed as a protector for your boat. On a common roller assembly, you see a roller, held on by a roller shaft, which is secure inside the roller bracket. This may leave the bracket exposed on ei...[Read More]
Our Price: $9.69 [Add to Cart]


]]> This 3.5 inch Black Rubber Roller cap is specifically designed as a protector for your boat. On a common roller assembly, you see a roller, held on by a roller shaft, which is secure inside the roller bracket. This may leave the bracket exposed on either edge, possibly yielding damaged to the boat if the boat is not loaded properly. To permanently prevent injury to the boat, this Rubber End cap can be installed on either end of the roller assembly, thus protecting the boat from damage. You will need a longer roller shaft if you are switching from a single roller setup to a roller with an end cap on each side to accommodate for the extra distance.
Factor in an extra inch per side to fit the roller end caps and figure out the length of shaft you will be needing.
This 3.5 inch roller end cap has an inner diameter of 5/8 inches and the outer diameter will match the thickness of the 5 inch, 8 inch, 10 inch, and 12 inch Black Rubber Rollerrs for a flush surface with a slight gap, just the distance of the roller bracket (which is not exposed).
This is for a single end cap.
MADE in the USA!
]]> <![CDATA[5 inch Black Rubber Keel Boat Roller 5/8" Bore ]]> https://www.trailer.parts/5-inch-Black-Rubber-Keel-Boat-Roller-58-Bore-_p_5433.html Wed, 7 Oct 2026 00:00:00 EST Black Rubber Boat Trailer Roller 5 inch Rubber Heavy Duty Spool Roller. This Rubber Spool Roller Measures 5 3/8 inches long. Will not Rust This 5 inch Roller long with a 5/8 inch bore for mounting with a Stainless Steel Boat Trailer Roller Shaft 6.5 ...[Read More]
Our Price: $22.95 [Add to Cart]


]]> https://www.trailer.parts/5-inch-Black-Rubber-Keel-Boat-Roller-58-Bore-_p_5433.html Black Rubber Boat Trailer Roller 5 inch Rubber Heavy Duty Spool Roller. This Rubber Spool Roller Measures 5 3/8 inches long. Will not Rust This 5 inch Roller long with a 5/8 inch bore for mounting with a Stainless Steel Boat Trailer Roller Shaft 6.5 ...[Read More]
Our Price: $22.95 [Add to Cart]


]]> Black Rubber Boat Trailer Roller
5 inch Rubber Heavy Duty Spool Roller. This Rubber Spool Roller Measures 5 3/8 inches long.
Will not Rust
This 5 inch Roller long with a 5/8 inch bore for mounting with a Stainless Steel Boat Trailer Roller Shaft 6.5 inch long 5/8 diameter or Zinc Plated Roller Shaft 6.5 inch long 5/8 inch Diameter inside a Roller Bracket that mounts to the cross members of your boat trailer. This assembly can be secured with 5/8 inch Zinc Plated Pal Nuts
Tapered design for optimal hull support
Makes Launching a Breeze
MADE IN THE USA!
]]> <![CDATA[3 inch Rubber Bow Roller for Boat Trailer Winch Stand]]> https://www.trailer.parts/3-inch-Rubber-Bow-Roller-for-Boat-Trailer-Winch-Stand_p_5434.html Wed, 7 Oct 2026 00:00:00 EST This is a Black Rubber 3 inch Bow Roller. Bow rollers are designed to be mounted at the front of your boat trailer right where the bow of the boat contacts where your winch is mounted. The device is commonly called a winch post, and would mount your ...[Read More]
Our Price: $7.55 [Add to Cart]


]]> https://www.trailer.parts/3-inch-Rubber-Bow-Roller-for-Boat-Trailer-Winch-Stand_p_5434.html This is a Black Rubber 3 inch Bow Roller. Bow rollers are designed to be mounted at the front of your boat trailer right where the bow of the boat contacts where your winch is mounted. The device is commonly called a winch post, and would mount your ...[Read More]
Our Price: $7.55 [Add to Cart]


]]> This is a Black Rubber 3 inch Bow Roller. Bow rollers are designed to be mounted at the front of your boat trailer right where the bow of the boat contacts where your winch is mounted. The device is commonly called a "winch post", and would mount your winch and also hold the bow roller in place. This particular roller measures a true 3 1/8 inches from end to end. Typically this roller mounts using a 1/2 inch Trailer Bolt (which is not included). Measure the space where your bow roller will mount, and determine the size bolt you will need.
MADE IN THE USA!
]]> <![CDATA[2 inch Boat V Shape Bow Stop]]> https://www.trailer.parts/2-inch-Boat-V-Shape-Bow-Stop_p_5435.html Wed, 7 Oct 2026 00:00:00 EST This Black Rubber 2 inch Bow stop is designed to mount towards the front of your boat trailer in the winch post. The base of this Bow Stop measures just under 2 inches. This 2 inch Bow V Stop will typically bolt with a 1/2 inch diameter Trailer Bolt ...[Read More]
Our Price: $8.01 [Add to Cart]


]]> https://www.trailer.parts/2-inch-Boat-V-Shape-Bow-Stop_p_5435.html This Black Rubber 2 inch Bow stop is designed to mount towards the front of your boat trailer in the winch post. The base of this Bow Stop measures just under 2 inches. This 2 inch Bow V Stop will typically bolt with a 1/2 inch diameter Trailer Bolt ...[Read More]
Our Price: $8.01 [Add to Cart]


]]> This Black Rubber 2 inch Bow stop is designed to mount towards the front of your boat trailer in the winch post. The base of this Bow Stop measures just under 2 inches. This 2 inch Bow V Stop will typically bolt with a 1/2 inch diameter Trailer Bolt (not included). ]]> <![CDATA[3 inch Boat V Shape Bow Stop ]]> https://www.trailer.parts/3-inch-Boat-V-Shape-Bow-Stop-_p_5436.html Wed, 7 Oct 2026 00:00:00 EST This Black Rubber 3 inch Bow stop is designed to mount towards the front of your boat trailer in the winch post. The base of this Bow Stop measures just under 3 inches. This 3 inch Bow V Stop will typically bolt with a 1/2 inch diameter Trailer Bolt ...[Read More]
Our Price: $17.60 [Add to Cart]


]]> https://www.trailer.parts/3-inch-Boat-V-Shape-Bow-Stop-_p_5436.html This Black Rubber 3 inch Bow stop is designed to mount towards the front of your boat trailer in the winch post. The base of this Bow Stop measures just under 3 inches. This 3 inch Bow V Stop will typically bolt with a 1/2 inch diameter Trailer Bolt ...[Read More]
Our Price: $17.60 [Add to Cart]


]]> This Black Rubber 3 inch Bow stop is designed to mount towards the front of your boat trailer in the winch post. The base of this Bow Stop measures just under 3 inches. This 3 inch Bow V Stop will typically bolt with a 1/2 inch diameter Trailer Bolt (not included). ]]> <![CDATA[5 inch Black Rubber spool Roller 5/8 Bore]]> https://www.trailer.parts/5-inch-Black-Rubber-spool-Roller-58-Bore_p_5437.html Wed, 7 Oct 2026 00:00:00 EST This 5 inch Black Rubber Roller by Yates, MADE IN THE USA, has a 5/8 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 6.5 inch long 5/8 inch Diameter. This roller will mount on a 5 inch Galvanized Roller Bracket that bolts...[Read More]
Our Price: $11.68 [Add to Cart]


]]> https://www.trailer.parts/5-inch-Black-Rubber-spool-Roller-58-Bore_p_5437.html This 5 inch Black Rubber Roller by Yates, MADE IN THE USA, has a 5/8 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 6.5 inch long 5/8 inch Diameter. This roller will mount on a 5 inch Galvanized Roller Bracket that bolts...[Read More]
Our Price: $11.68 [Add to Cart]


]]> This 5 inch Black Rubber Roller by Yates, MADE IN THE USA, has a 5/8 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 6.5 inch long 5/8 inch Diameter. This roller will mount on a 5 inch Galvanized Roller Bracket that bolts to the cross members of your boat trailer. The roller and shaft assembly can be secured together using 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts that are hammered onto the ends of the shaft. Heavy Duty Rubber and the Spool design of the roller allow for easy loading and unloading of the boat. This design will work on many types of boat hulls. This assembly then uses Boat Trailer U-Bolts or Trailer Bolts to mount the Roller bracket to the trailers cross-member.
MADE IN THE USA!
]]> <![CDATA[4 inch Black Rubber spool Roller 5/8 Bore]]> https://www.trailer.parts/4-inch-Black-Rubber-spool-Roller-58-Bore_p_5438.html Wed, 7 Oct 2026 00:00:00 EST This 4 inch Black Rubber Roller has a 5/8 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 5.5 inch long 5/8 inch Diameter. This roller will mount on a 4 inch Galvanized Roller Bracket that bolts to the cross members of yo...[Read More]
Our Price: $11.19 [Add to Cart]


]]> https://www.trailer.parts/4-inch-Black-Rubber-spool-Roller-58-Bore_p_5438.html This 4 inch Black Rubber Roller has a 5/8 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 5.5 inch long 5/8 inch Diameter. This roller will mount on a 4 inch Galvanized Roller Bracket that bolts to the cross members of yo...[Read More]
Our Price: $11.19 [Add to Cart]


]]> This 4 inch Black Rubber Roller has a 5/8 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 5.5 inch long 5/8 inch Diameter. This roller will mount on a 4 inch Galvanized Roller Bracket that bolts to the cross members of your boat trailer. The roller and shaft assembly can be secured together using 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts that are hammered onto the ends of the shaft. Heavy Duty Rubber and the Spool design of the roller allow for easy loading and unloading of the boat. This design will work on many types of boat hulls. This roller bracket assembly then uses Boat Trailer U-Bolts or Trailer Bolts to mount to the trailers cross-member.
MADE IN THE USA!
]]> <![CDATA[3.25 inch Stoltz Boat Trailer Roller End Cap 5/8" Bore]]> https://www.trailer.parts/325-inch-Stoltz-Boat-Trailer-Roller-End-Cap-58-Bore_p_5439.html Wed, 7 Oct 2026 00:00:00 EST 3.25 inch Stoltz Roller End Cap with a 5/8 inch inner boreThis Stoltz Roller End Cap is meant to be mounted on either end of a Stoltz Roller. When using a 3.25 Stoltz End cap, you get the added protection and security by covering the previously expos...[Read More]
Our Price: $9.90 [Add to Cart]


]]> https://www.trailer.parts/325-inch-Stoltz-Boat-Trailer-Roller-End-Cap-58-Bore_p_5439.html 3.25 inch Stoltz Roller End Cap with a 5/8 inch inner boreThis Stoltz Roller End Cap is meant to be mounted on either end of a Stoltz Roller. When using a 3.25 Stoltz End cap, you get the added protection and security by covering the previously expos...[Read More]
Our Price: $9.90 [Add to Cart]


]]> 3.25 inch Stoltz Roller End Cap with a 5/8 inch inner bore
This Stoltz Roller End Cap is meant to be mounted on either end of a Stoltz Roller. When using a 3.25 Stoltz End cap, you get the added protection and security by covering the previously exposed roller bracket. In the event that the boat is not loaded properly, the roller bracket will be covered and wont scratch up the hull of your boat. Also, when using these Stoltz End caps, you need a roller shaft that is slightly longer, so double check to make sure you get the proper length roller shaft if buying a complete assembly. If you have any questions please contact us!
Safely matches up the outer diameter on the 8 inch Stoltz Keel Roller, 10 inch Stoltz Keel Roller, and 12 inch Stoltz Keel Roller for a flush mounting surface.
The 5/8 inner Bore of the End Cap still allows you to use the common 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts to secure the Stoltz Roller Assembly.
Will not Rust or Mark up Your Boat
Extremely Cut and Abrasion Resistant
Makes Launching a Breeze
Guaranteed to outlast any other roller on the market!
Non-Imitation, the real thing! Made in the USA!
]]> <![CDATA[4 inch Stoltz Bow Roller with Bells for Winch Stand]]> https://www.trailer.parts/4-inch-Stoltz-Bow-Roller-with-Bells-for-Winch-Stand_p_5440.html Wed, 7 Oct 2026 00:00:00 EST This is Product is an assembly put together of Stoltz products and Stainless Steel Hardware. This is a 4 inch Stoltz Bow Roller with Stoltz Bells. You can use this product to replace and existing cracked and faded bow roller set-up, or to beef up you...[Read More]
Our Price: $53.41 [Add to Cart]


]]> https://www.trailer.parts/4-inch-Stoltz-Bow-Roller-with-Bells-for-Winch-Stand_p_5440.html This is Product is an assembly put together of Stoltz products and Stainless Steel Hardware. This is a 4 inch Stoltz Bow Roller with Stoltz Bells. You can use this product to replace and existing cracked and faded bow roller set-up, or to beef up you...[Read More]
Our Price: $53.41 [Add to Cart]


]]> This is Product is an assembly put together of Stoltz products and Stainless Steel Hardware. This is a 4 inch Stoltz Bow Roller with Stoltz Bells. You can use this product to replace and existing cracked and faded bow roller set-up, or to beef up your current one with the best option on the market. This assembly includes the 4 inch Stoltz bow Roller, the (2) Stoltz Brand Bells, and a Stainless Steel 1/2 inch diameter bolt to mount the assembly. This 4 inch Stoltz Roller Roller with Bell assembly would mount on the front of your trailer in the winch post or winch stand. This is meant to be the contact point for the bow of your boat as you load and unload. In many cases, having the addition of the bells significantly helps guide and direct the bow of the boat the last final inches, ensuring correct placement. In addition, having the bells protects the boats bow front making contact with the winch post arms, which can damage the hull of the boat. Stoltz Brand Products, especially with this set up, wont crack and mark up your boat hull! This is the real deal. Have a Stoltz Brand Polyurethane Bow Roller ensures that you will not have any issues for the remaining life of your boat and trailer. Other rollers with crack, fade, and mark up your boats hull. A damaged bow stop could lead to failure, causing the bow of your boat to hit the winch post. To avoid this, only use Stoltz products, because they simply are the best bang for your buck. ]]> <![CDATA[4 inch Stoltz Bow Roller for Winch Posts of Boat Trailer ]]> https://www.trailer.parts/4-inch-Stoltz-Bow-Roller-for-Winch-Posts-of-Boat-Trailer-_p_5441.html Wed, 7 Oct 2026 00:00:00 EST This is a Stoltz brand Poly 4 inch Bow Roller. This Bow Roller is designed specifically for boat trailer use, to be mounted towards the front of your trailer, on the winch stand/post, to protect the bow of the boat as you load or unload. These Bow ro...[Read More]
Our Price: $18.30 [Add to Cart]


]]> https://www.trailer.parts/4-inch-Stoltz-Bow-Roller-for-Winch-Posts-of-Boat-Trailer-_p_5441.html This is a Stoltz brand Poly 4 inch Bow Roller. This Bow Roller is designed specifically for boat trailer use, to be mounted towards the front of your trailer, on the winch stand/post, to protect the bow of the boat as you load or unload. These Bow ro...[Read More]
Our Price: $18.30 [Add to Cart]


]]> This is a Stoltz brand Poly 4 inch Bow Roller. This Bow Roller is designed specifically for boat trailer use, to be mounted towards the front of your trailer, on the winch stand/post, to protect the bow of the boat as you load or unload. These Bow rollers fit with 1/2 inch Boat Trailer Bolts. Simply pick the correct length, we have them in stainless steel and zinc plated. Stoltz Products are simply the best option for rollers and stops for your boat trailer. Extremely UV resistant elements prevent this roller from fading and cracking like other rubber rollers or cheaper versions of poly rollers. This is a very tough contact point on a boat so having the best quality product is essential. The out a quality Stoltz 4 inch Bow Roller! ]]> <![CDATA[3 inch Stoltz Bow Roller with Bells for Winch Stand]]> https://www.trailer.parts/3-inch-Stoltz-Bow-Roller-with-Bells-for-Winch-Stand_p_5442.html Wed, 7 Oct 2026 00:00:00 EST This is Product is an assembly put together of Stoltz products and Stainless Steel Hardware. This is a 3 inch Stoltz Bow Roller with Stoltz Bells. You can use this product to replace and existing cracked and faded bow roller set-up, or to beef up you...[Read More]
Our Price: $50.90 [Add to Cart]


]]> https://www.trailer.parts/3-inch-Stoltz-Bow-Roller-with-Bells-for-Winch-Stand_p_5442.html This is Product is an assembly put together of Stoltz products and Stainless Steel Hardware. This is a 3 inch Stoltz Bow Roller with Stoltz Bells. You can use this product to replace and existing cracked and faded bow roller set-up, or to beef up you...[Read More]
Our Price: $50.90 [Add to Cart]


]]> This is Product is an assembly put together of Stoltz products and Stainless Steel Hardware. This is a 3 inch Stoltz Bow Roller with Stoltz Bells. You can use this product to replace and existing cracked and faded bow roller set-up, or to beef up your current one with the best option on the market. This assembly includes the 3 inch Stoltz bow Roller, the (2) Stoltz Brand Bells, and a Stainless Steel 1/2 inch diameter bolt to mount the assembly. This 3 inch Stoltz Roller Roller with Bell assembly would mount on the front of your trailer in the winch post or winch stand. This is meant to be the contact point for the bow of your boat as you load and unload. In many cases, having the addition of the bells significantly helps guide and direct the bow of the boat the last final inches, ensuring correct placement. In addition, having the bells protects the boats bow front making contact with the winch post arms, which can damage the hull of the boat. Stoltz Brand Products, especially with this set up, wont crack and mark up your boat hull! This is the real deal! ]]> <![CDATA[3 inch Stoltz Bow Roller for Winch Posts of Boat Trailer]]> https://www.trailer.parts/3-inch-Stoltz-Bow-Roller-for-Winch-Posts-of-Boat-Trailer_p_5443.html Wed, 7 Oct 2026 00:00:00 EST This is a Stoltz brand Poly 3 inch Bow Roller. This Bow Roller is designed specifically for boat trailer use, to be mounted towards the front of your trailer, on the winch stand/post, to protect the bow of the boat as you load or unload. These Bow ro...[Read More]
Our Price: $17.19 [Add to Cart]


]]> https://www.trailer.parts/3-inch-Stoltz-Bow-Roller-for-Winch-Posts-of-Boat-Trailer_p_5443.html This is a Stoltz brand Poly 3 inch Bow Roller. This Bow Roller is designed specifically for boat trailer use, to be mounted towards the front of your trailer, on the winch stand/post, to protect the bow of the boat as you load or unload. These Bow ro...[Read More]
Our Price: $17.19 [Add to Cart]


]]> This is a Stoltz brand Poly 3 inch Bow Roller. This Bow Roller is designed specifically for boat trailer use, to be mounted towards the front of your trailer, on the winch stand/post, to protect the bow of the boat as you load or unload. These Bow rollers fit with 1/2 inch Trailer Bolts. Simply pick the correct length, we have them in stainless steel and zinc plated. Stoltz Products are simply the best option for rollers and stops for your boat trailer. Extremely UV resistant elements prevent this roller from fading and cracking like other rubber rollers or cheaper versions of poly rollers. This is a very tough contact point on a boat so having the best quality product is essential. The out a quality Stoltz 3 inch Bow Roller! ]]> <![CDATA[4 inch Stoltz Vee Stop for Bow of Boat, on Winch Posts]]> https://www.trailer.parts/4-inch-Stoltz-Vee-Stop-for-Bow-of-Boat-on-Winch-Posts_p_5444.html Wed, 7 Oct 2026 00:00:00 EST This is a 4 inch Stoltz Bow V-Stop. This Stoltz product is designed to mount in the front of your boat trailer, in the winch post, to catch your boats bow as it reaches the winch. Whether you are driving the boat on, pulling it on with a rope, or win...[Read More]
Our Price: $22.85 [Add to Cart]


]]> https://www.trailer.parts/4-inch-Stoltz-Vee-Stop-for-Bow-of-Boat-on-Winch-Posts_p_5444.html This is a 4 inch Stoltz Bow V-Stop. This Stoltz product is designed to mount in the front of your boat trailer, in the winch post, to catch your boats bow as it reaches the winch. Whether you are driving the boat on, pulling it on with a rope, or win...[Read More]
Our Price: $22.85 [Add to Cart]


]]> This is a 4 inch Stoltz Bow V-Stop. This Stoltz product is designed to mount in the front of your boat trailer, in the winch post, to catch your boats bow as it reaches the winch. Whether you are driving the boat on, pulling it on with a rope, or winching the boat, the bow stop will end up being the last part the boat touches as you secure it to the trailer. Therefore, you want this Bow Stop to be there when it counts. Imagine your loading your boat, driving the boat on the trailer, only to have the bow stop crack because it dried out in the sun, then you crack the hull of the boat because there's nothing to protect it. Try a Stoltz Bow Stop, the formula Stoltz uses anti UV and eliminates drying and cracking. This Bow stop will also not discolor the boat or mark it up. This 4 inch Stoltz V Stop can be mounted with a 1/2 inch diameter Trailer Bolt. Simply select the correct length, and whether you want it in Zinc Plated or Stainless Steel. ]]> <![CDATA[3 inch Stoltz Bow Vee Stop for Bow of Boat]]> https://www.trailer.parts/3-inch-Stoltz-Bow-Vee-Stop-for-Bow-of-Boat_p_5445.html Wed, 7 Oct 2026 00:00:00 EST This is a 3 inch Stoltz Bow V-Stop. This Stoltz product is designed to mount in the front of your boat trailer, in the winch post, to catch your boats bow as it reaches the winch. Whether you are driving the boat on, pulling it on with a rope, or win...[Read More]
Our Price: $16.84 [Add to Cart]


]]> https://www.trailer.parts/3-inch-Stoltz-Bow-Vee-Stop-for-Bow-of-Boat_p_5445.html This is a 3 inch Stoltz Bow V-Stop. This Stoltz product is designed to mount in the front of your boat trailer, in the winch post, to catch your boats bow as it reaches the winch. Whether you are driving the boat on, pulling it on with a rope, or win...[Read More]
Our Price: $16.84 [Add to Cart]


]]> This is a 3 inch Stoltz Bow V-Stop. This Stoltz product is designed to mount in the front of your boat trailer, in the winch post, to catch your boats bow as it reaches the winch. Whether you are driving the boat on, pulling it on with a rope, or winching the boat, the bow stop will end up being the last part the boat touches as you secure it to the trailer. Therefore, you want this Bow Stop to be there when it counts. Imagine your loading your boat, driving the boat on the trailer, only to have the bow stop crack because it dried out in the sun, then you crack the hull of the boat because there's nothing to protect it. Try a Stoltz Bow Stop, the formula Stoltz uses anti UV and eliminates drying and cracking. This Bow stop will also not discolor the boat or mark it up. This 3 inch Stoltz V Stop can be mounted with a 1/2 inch diameter Boat Trailer Bolts. Simply select the correct length, and whether you want it in Zinc Plated or Stainless Steel. ]]> <![CDATA[8 inch Bunk Bracket Swivel Top Bolster Support for Bunk Boards]]> https://www.trailer.parts/8-inch-Bunk-Bracket-Swivel-Top-Bolster-Support-for-Bunk-Boards_p_5446.html Wed, 7 Oct 2026 00:00:00 EST This 8 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards sets and also to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross memb...[Read More]
Our Price: $8.49 [Add to Cart]


]]> https://www.trailer.parts/8-inch-Bunk-Bracket-Swivel-Top-Bolster-Support-for-Bunk-Boards_p_5446.html This 8 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards sets and also to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross memb...[Read More]
Our Price: $8.49 [Add to Cart]


]]> This 8 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards sets and also to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross members in front and behind the axle, a common single axle trailer might have (4) of these. These galvanized 8 inch Bunk Brackets have slotted 1/2 inch diameter holes to accommodate 1/2 inch Trailer Bolts or Boat Trailer U-Bolts. The slotted holes allow you to adjust the height of the bunks. We offer these in 10 inch Bunk Bracket Swivel Top and 12 inch Bunk Bracket Swivel Top if you are needing a different height for your adjustment. The 8 inch measurement is the length of the bracket itself.
Keep in mind when replacing the entire Swivel Top Bunk Bracket you may also need new mounting Bolts or U-Bolts, and also we be needing replacement Bunk Bracket Lag Screws to re-mount your bunk boards if you are using a 2 x 4 or 2 x 6. There is an image that shows a model of a Swivel Top Bunk Bracket attached to a 3 by 3 Cross-Member using a U-Bolt (This Does not represent how every swivel top is mounted, but just shows an example.) These Swivel Top Bunk Brackets are also commonly mounted to cross members that are C Channel in shape and have different dimensions. Measure your frame dimensions, or simply measure your previous U-Bolts if you are replacing with the same setup!

This kit includes the support bracket, swivel top, 7/16" x 1" zinc plated bolt for mounting the swivel top to the bracket, and the bolt hardware.


Swivel Top Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Bunk Bracket Lag Screws are used in pairs to secure your boat trailers bunk boards to the Swivel Top Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.
Boat Trailer Bunk Boards come pre carpeted and ready to mount onto your swivel top bunk brackets using lag screws.

]]> <![CDATA[10 inch Bunk Bracket Swivel Top Bolster Support for Bunk Boards]]> https://www.trailer.parts/10-inch-Bunk-Bracket-Swivel-Top-Bolster-Support-for-Bunk-Boards_p_5447.html Wed, 7 Oct 2026 00:00:00 EST This 10 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards sets and also to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross mem...[Read More]
Our Price: $8.80 [Add to Cart]


]]> https://www.trailer.parts/10-inch-Bunk-Bracket-Swivel-Top-Bolster-Support-for-Bunk-Boards_p_5447.html This 10 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards sets and also to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross mem...[Read More]
Our Price: $8.80 [Add to Cart]


]]> This 10 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards sets and also to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross members in front and behind the axle, a common single axle trailer might have (4) of these. These galvanized 10 inch Bunk Brackets have slotted 1/2 inch diameter holes to accommodate 1/2 inch Boat Trailer Bolts or Boat Trailer U-Bolts. The slotted holes allow you to adjust the height of the bunks. We offer these in 8 inch Bunk Bracket Swivel Top and 12 inch Bunk Bracket Swivel Top if you are needing a different height for your adjustment. The 10 inch measurement is the length of the bracket itself.
Keep in mind when replacing the entire Swivel Top Bunk Bracket you commonly will also need new mounting Bolts or U-Bolts, and also replacement 5/16 x 1 1/2 Galvanized Lag Screws for Swivel Top Bunk Bracket (2) to re-mount your bunk boards if you are using a 2 x 4 or 2 x 6. There is an image that shows a Model of a Swivel Top Bunk Bracket attached to a 3 by 3 Cross-Member using a U-Bolt (This Does not represent how every swivel top is mounted, but just shows an example.) These Swivel Top Bunk Brackets are also commonly mounted to cross members that are C Channel in shape and have different dimensions. Measure your frame dimensions, or simply measure your previous U-Bolts if you are replacing with the same setup!
This Style of bunk support is also sometimes used towards the front of the trailer on the front two cross beams. You would use what is referred to as mini bunks to support and guide the bow of your boat towards your winch post.

This kit includes the support bracket, swivel top, 7/16" x 1" zinc plated bolt for mounting the swivel top to the bracket, and the bolt hardware.


Swivel Top Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Bunk Bracket Lag Screws are used in pairs to secure your boat trailers bunk boards to the Swivel Top Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.
Boat Trailer Bunk Boards come pre carpeted and ready to mount onto your swivel top bunk brackets using lag screws.

]]> <![CDATA[12 inch Bunk Bracket Swivel Top Bolster Support for Bunk Boards]]> https://www.trailer.parts/12-inch-Bunk-Bracket-Swivel-Top-Bolster-Support-for-Bunk-Boards_p_5448.html Wed, 7 Oct 2026 00:00:00 EST This 12 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards set ups that commonly use to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted ...[Read More]
Our Price: $10.28 [Add to Cart]


]]> https://www.trailer.parts/12-inch-Bunk-Bracket-Swivel-Top-Bolster-Support-for-Bunk-Boards_p_5448.html This 12 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards set ups that commonly use to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted ...[Read More]
Our Price: $10.28 [Add to Cart]


]]> This 12 inch Hot-Dipped Galvanized Swivel Top Bunk Bracket kit is designed for Boat Trailer Bunk Boards set ups that commonly use to adjust the angle to the contour of the boat hull. Typically, these adjustable swivel bunk board brackets are mounted to cross members in front and behind the axle, a common single axle trailer might have (4) of these. These galvanized 12 inch Bunk Brackets have slotted 1/2 inch diameter holes to accommodate 1/2 inch Boat Trailer Bolts or Boat Trailer U-Bolts. The slotted holes allow you to adjust the height of the bunks.

Keep in mind when replacing the entire Swivel Top Bunk Bracket you commonly will also need new mounting Bolts or U-Bolts, and also we be needing replacement 5/16 x 1 1/2 Galvanized Lag Screws for Swivel Top Bunk Bracket (2) to re-mount your bunk boards if you are using a 2 x 4 or 2 x 6. There is an image that shows a Model of a Swivel Top Bunk Bracket attached to a 3 by 3 Cross-Member using a U-Bolt (This Does not represent how every swivel top is mounted, but just shows an example.) These Swivel Top Bunk Brackets are also commonly mounted to cross members that are C Channel in shape and have different dimensions. Measure your frame dimensions, or simply measure your previous U-Bolts if you are replacing with the same setup!
This Style of bunk support is also sometimes used towards the front of the trailer on the front two cross beams. You would use what is referred to as mini bunks to support and guide the bow of your boat towards your winch post.

This kit includes the support bracket, swivel top, 7/16" x 1" zinc plated bolt for mounting the swivel top to the bracket, and the bolt hardware.


Swivel Top Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Bunk Bracket Lag Screws are used in pairs to secure your boat trailers bunk boards to the Swivel Top Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.
Boat Trailer Bunk Boards come pre carpeted and ready to mount onto your swivel top bunk brackets using lag screws.

]]> <![CDATA[8 inch Vertical Bunk Bracket Galvanized Support for Boat Trailer]]> https://www.trailer.parts/8-inch-Vertical-Bunk-Bracket-Galvanized-Support-for-Boat-Trailer_p_5449.html Wed, 7 Oct 2026 00:00:00 EST This 8 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a si...[Read More]
Our Price: $7.84 [Add to Cart]


]]> https://www.trailer.parts/8-inch-Vertical-Bunk-Bracket-Galvanized-Support-for-Boat-Trailer_p_5449.html This 8 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a si...[Read More]
Our Price: $7.84 [Add to Cart]


]]> This 8 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a single axle trailer would have 4 of these mounted to hold up the boat. The 1/2 inch adjustable slotted holes allow for you to fix the height of your bunks to get the right ride height for your boat. If you are needing a different height we also have available the 10 inch Vertical Bunk Bracket Galvanized and 12 inch Vertical Bunk Bracket Galvanized as other height options.
Ideally, you would use either Trailer Bolts or Boat Trailer U-Bolts to mount these bunk brackets around your boat trailers cross-members. The cross-members are the the pieces of either galvanized channel, tubing, or aluminum tubing that connect one side of the trailer frame to the other, typically in front, and behind the trailers axle or axles. In some cases with a tandem axle trailer, there may be 3 cross-members. When mounting this 8 inch Vertical Galvanized Bunk Bracket, mount the flat side to the face of the cross-member, and the open side will face away from the cross-member.

Important things to consider when replacing Vertical Bunk Brackets.
1. Desired Bunk Board Height- Do you want the same size or would you prefer a shorter, or taller height for your boat. If you are going shorter keep in mind the changing ride height of the boat puts it closer to the trailer fenders and also the motor closer to the ground.
2. Keep Track of Hardware needed to replace the bunks. These bunk brackets will mount with either 1/2 inch bolts or U-Bolts. Determine which is needed, and the appropriate measurement. Most commonly, U-Bolts fastened around the trailers cross-member, and through the slotted holes. Determine the dimension needed to go around the cross-member by measuring the height and width. Keep in mind to add extra length for the nuts and washers.
You may also need a through bolt for the desired bunk board you will be installing in the bunk bracket. The correct size Bolt is a 3/8 x 3 inch Bolt available in Stainless Steel and Zinc Plated.


Vertical Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the Vertical Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.
Boat Trailer Bunk Boards come pre carpeted and ready to mount onto your swivel top bunk brackets using lag screws.

]]> <![CDATA[10 inch Vertical Bunk Bracket Galvanized support for Boat Trailer]]> https://www.trailer.parts/10-inch-Vertical-Bunk-Bracket-Galvanized-support-for-Boat-Trailer_p_5450.html Wed, 7 Oct 2026 00:00:00 EST This 10 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a s...[Read More]
Our Price: $9.24 [Add to Cart]


]]> https://www.trailer.parts/10-inch-Vertical-Bunk-Bracket-Galvanized-support-for-Boat-Trailer_p_5450.html This 10 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a s...[Read More]
Our Price: $9.24 [Add to Cart]


]]> This 10 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a single axle trailer would have 4 of these mounted to hold up the boat. The 1/2 inch adjustable slotted holes allow for you to fix the height of your bunks to get the right ride height for your boat. If you are needing a different height we also have available the 8 inch Vertical Bunk Bracket Galvanized and 12 inch Vertical Bunk Bracket Galvanized for different height options.
Ideally, you would use either Boat Trailer Bolts or Boat Trailer U-Bolts to mount these bunk brackets around your boat trailers cross-members. The cross-members are the the pieces of either galvanized channel, tubing, or aluminum tubing that connect one side of the trailer frame to the other, typically in front, and behind the trailers axle or axles. In some cases with a tandem axle trailer, there may be 3 cross-members. When mounting this 10 inch Vertical Galvanized Bunk Bracket, mount the flat side to the face of the cross-member, and the open side will face away from the cross-member.
Important things to consider when replacing Vertical Bunk Brackets.
1. Desired Bunk Board Height- Do you want the same size or would you prefer a shorter, or taller height for your boat. If you are going shorter keep in mind the changing ride height of the boat puts it closer to the trailer fenders and also the motor closer to the ground.
2. Keep Track of Hardware needed to replace the bunks. These bunk brackets will mount with either 1/2 inch bolts or U-Bolts. Determine which is needed, and the appropriate measurement. Most commonly, U-Bolts fastened around the trailers cross-member, and through the slotted holes. Determine the dimension needed to go around the cross-member by measuring the height and width. Keep in mind to add extra length for the nuts and washers.
You may also need a through bolt for the desired bunk board you will be installing in the bunk bracket. The correct size Bolt is a 3/8 x 3 inch Bolt available in Stainless Steel and Zinc Plated.


Vertical Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the Vertical Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.
Boat Trailer Bunk Boards come pre carpeted and ready to mount onto your swivel top bunk brackets using lag screws.

]]> <![CDATA[12 inch Vertical Bunk Bracket Galvanized support for Boat Trailer]]> https://www.trailer.parts/12-inch-Vertical-Bunk-Bracket-Galvanized-support-for-Boat-Trailer_p_5451.html Wed, 7 Oct 2026 00:00:00 EST This 12 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a s...[Read More]
Our Price: $11.76 [Add to Cart]


]]> https://www.trailer.parts/12-inch-Vertical-Bunk-Bracket-Galvanized-support-for-Boat-Trailer_p_5451.html This 12 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a s...[Read More]
Our Price: $11.76 [Add to Cart]


]]> This 12 inch Vertical Galvanized Bunk Bracket allows you to vertically mount Boat Trailer Bunk Boards. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a single axle trailer would have 4 of these mounted to hold up the boat. The 1/2 inch adjustable slotted holes allow for you to fix the height of your bunks to get the right ride height for your boat. If you are needing a different height we also have available the 10 inch Vertical Bunk Bracket Galvanized and 8 inch Vertical Bunk Bracket Galvanized
Ideally, you would use either Boat Trailer Bolts or Boat Trailer U-Bolts to mount these bunk brackets around your boat trailers cross-members. The cross-members are the the pieces of either galvanized channel, tubing, or aluminum tubing that connect one side of the trailer frame to the other, typically in front, and behind the trailers axle or axles. In some cases with a tandem axle trailer, there may be 3 cross-members. When mounting this 12 inch Vertical Galvanized Bunk Bracket, mount the flat side to the face of the cross-member, and the open side will face away from the cross-member.
Important things to consider when replacing Vertical Bunk Brackets.
1. Desired Bunk Board Height- Do you want the same size or would you prefer a shorter, or taller height for your boat. If you are going shorter keep in mind the changing ride height of the boat puts it closer to the trailer fenders and also the motor closer to the ground.
2. Keep Track of Hardware needed to replace the bunks. These bunk brackets will mount with either 1/2 inch bolts or U-Bolts. Determine which is needed, and the appropriate measurement. Most commonly, U-Bolts fastened around the trailers cross-member, and through the slotted holes. Determine the dimension needed to go around the cross-member by measuring the height and width. Keep in mind to add extra length for the nuts and washers.
You may also need a through bolt for the desired bunk board you will be installing in the bunk bracket. The correct size bolt is a 3/8 x 3 inch bolt available in Stainless Steel and Zinc Plated.


Vertical Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the Vertical Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.
Boat Trailer Bunk Boards come pre carpeted and ready to mount onto your swivel top bunk brackets using lag screws.

]]> <![CDATA[6 inch Bunk Bracket Aluminum L-Type for Bunk Boards on Boat Trailers]]> https://www.trailer.parts/6-inch-Bunk-Bracket-Aluminum-L-Type-for-Bunk-Boards-on-Boat-Trailers_p_5455.html Wed, 7 Oct 2026 00:00:00 EST This product is a solid 6 inch Aluminum L-Shaped Bunk Bracket support for your Boat Trailer. This Bunk Bracket measures 6 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness ...[Read More]
Our Price: $15.73 [Add to Cart]


]]> https://www.trailer.parts/6-inch-Bunk-Bracket-Aluminum-L-Type-for-Bunk-Boards-on-Boat-Trailers_p_5455.html This product is a solid 6 inch Aluminum L-Shaped Bunk Bracket support for your Boat Trailer. This Bunk Bracket measures 6 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness ...[Read More]
Our Price: $15.73 [Add to Cart]


]]> This product is a solid 6 inch Aluminum L-Shaped Bunk Bracket support for your Boat Trailer. This Bunk Bracket measures 6 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 6 inch Aluminum bunk bracket is 1/4 inch for maximum strength. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 6 inch L-Shape Aluminum Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
When replacing existing rusted L Shape bunk brackets of the same style and switching to this aluminum bunk bracket, keep in mind you need to use equally durable hardware. It is very common to see Galvanized Bunk Brackets, when replaced, eat through the aluminum cross-member slightly, this also happens with the U-Bolts when galvanized U-Bolts are used on aluminum. To permanently prevent this problem, use Stainless Steel U-Bolts to mount your Aluminum Bunk Bracket to your Aluminum cross-member. If you are mounting this 6 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct stainless steel U-Bolt is Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Hot-Dipped Galvanized.
In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Trailer Bolts.
These bunk brackets typically are replaced in pairs, so keep that in mind!


L Type Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the L Type Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.

]]> <![CDATA[8 inch Bunk Bracket Aluminum L-Type for Bunk Boards on Boat Trailers]]> https://www.trailer.parts/8-inch-Bunk-Bracket-Aluminum-L-Type-for-Bunk-Boards-on-Boat-Trailers_p_5457.html Wed, 7 Oct 2026 00:00:00 EST This product is a solid 8 inch Aluminum L-Shaped Bunk Bracket. This Bunk Bracket measures 8 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 8 inch Aluminum bunk b...[Read More]
Our Price: $18.79 [Add to Cart]


]]> https://www.trailer.parts/8-inch-Bunk-Bracket-Aluminum-L-Type-for-Bunk-Boards-on-Boat-Trailers_p_5457.html This product is a solid 8 inch Aluminum L-Shaped Bunk Bracket. This Bunk Bracket measures 8 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 8 inch Aluminum bunk b...[Read More]
Our Price: $18.79 [Add to Cart]


]]> This product is a solid 8 inch Aluminum L-Shaped Bunk Bracket. This Bunk Bracket measures 8 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 8 inch Aluminum bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 8 inch L-Shape Aluminum Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
When replacing existing rusted L Shape bunk brackets of the same style and switching to this aluminum bunk bracket, keep in mind you need to use equally durable hardware. It is very common to see Galvanized Bunk Brackets, when replaced, eat through the aluminum cross-member slightly, this also happens with the U-Bolts when galvanized U-Bolts are used on aluminum. To permanently prevent this problem, use Stainless Steel U-Bolts to mount your Aluminum Bunk Bracket to your Aluminum cross-member. If you are mounting this 8 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct stainless steel U-Bolt is Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Hot-Dipped Galvanized.
In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Boat Trailer Bolts.
These bunk brackets typically are replaced in pairs, so keep that in mind!


L Type Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the L Type Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.

]]> <![CDATA[10 inch Bunk Bracket Aluminum L-Type for Bunk Boards on Boat Trailer]]> https://www.trailer.parts/10-inch-Bunk-Bracket-Aluminum-L-Type-for-Bunk-Boards-on-Boat-Trailer_p_5458.html Wed, 7 Oct 2026 00:00:00 EST This product is a solid 10 inch Aluminum L-Shaped Bunk Bracket. This Bunk Bracket measures 10 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 6 inch Aluminum bunk...[Read More]
Our Price: $21.12 [Add to Cart]


]]> https://www.trailer.parts/10-inch-Bunk-Bracket-Aluminum-L-Type-for-Bunk-Boards-on-Boat-Trailer_p_5458.html This product is a solid 10 inch Aluminum L-Shaped Bunk Bracket. This Bunk Bracket measures 10 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 6 inch Aluminum bunk...[Read More]
Our Price: $21.12 [Add to Cart]


]]> This product is a solid 10 inch Aluminum L-Shaped Bunk Bracket. This Bunk Bracket measures 10 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 6 inch Aluminum bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 10 inch L-Shape Aluminum Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
When replacing existing rusted L Shape bunk brackets of the same style and switching to this aluminum bunk bracket, keep in mind you need to use equally durable hardware. It is very common to see Galvanized Bunk Brackets, when replaced, eat through the aluminum cross-member slightly, this also happens with the U-Bolts when galvanized U-Bolts are used on aluminum. To permanently prevent this problem, use Stainless Steel U-Bolts to mount your Aluminum Bunk Bracket to your Aluminum cross-member. If you are mounting this 10 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct stainless steel U-Bolt is Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Hot-Dipped Galvanized.
In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Boat Trailer Bolts.
These bunk brackets typically are replaced in pairs!


L Type Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the L Type Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.

]]> <![CDATA[6 inch Bunk Bracket Galvanized L-Type for Boat Trailer Bunk Boards]]> https://www.trailer.parts/6-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5459.html Wed, 7 Oct 2026 00:00:00 EST This product is a 6 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 6 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 6 inch Hot-Dipp...[Read More]
Our Price: $11.96 [Add to Cart]


]]> https://www.trailer.parts/6-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5459.html This product is a 6 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 6 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 6 inch Hot-Dipp...[Read More]
Our Price: $11.96 [Add to Cart]


]]> This product is a 6 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 6 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 6 inch Hot-Dipped Galvanized bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 6 inch L-Shape Galvanized Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
Choosing Hot-Dipped Galvanized L-Shape Bunk Brackets ensures a strong and sturdy corrosion resistant bunk bracket. Keep in mind that replacing bunk brackets typically also means your will be needing additional U-Bolts for mounting the new Bunk Brackets, and also bolts to re-bolt the bunk boards into the Bunk Brackets. These are both available on our website!
If you are mounting this 6 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct Hot-Dipped Galvanized U-Bolt is Galvanized U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Stainless Steel and will NEVER RUST!
In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Boat Trailer Bolts.
These bunk brackets typically are replaced in pairs, so keep that in mind!


L Type Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the L Type Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.

]]> <![CDATA[8 inch Bunk Bracket Galvanized L-Type for Boat Trailer Bunk Boards]]> https://www.trailer.parts/8-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5460.html Wed, 7 Oct 2026 00:00:00 EST This product is a 8 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 8 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 8 inch Hot-Dipp...[Read More]
Our Price: $14.01 [Add to Cart]


]]> https://www.trailer.parts/8-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5460.html This product is a 8 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 8 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 8 inch Hot-Dipp...[Read More]
Our Price: $14.01 [Add to Cart]


]]> This product is a 8 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 8 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 8 inch Hot-Dipped Galvanized bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 8 inch L-Shape Galvanized Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
Choosing Hot-Dipped Galvanized L-Shape Bunk Brackets ensures a strong and sturdy corrosion resistant bunk bracket. Keep in mind that replacing bunk brackets typically also means your will be needing additional U-Bolts for mounting the new Bunk Brackets, and also bolts to re-bolt the bunk boards into the Bunk Brackets. These are both available on our website!
If you are mounting this 8 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct Hot-Dipped Galvanized U-Bolt is Galvanized U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Stainless Steel and will NEVER RUST!
In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Boat Trailer Bolts.
These bunk brackets typically are replaced in pairs, so keep that in mind!


L Type Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the L Type Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.

]]> <![CDATA[10 inch Bunk Bracket Galvanized L-Type for Boat Trailer Bunk Boards]]> https://www.trailer.parts/10-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5461.html Wed, 7 Oct 2026 00:00:00 EST This product is a 10 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 10 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 10 inch Hot-D...[Read More]
Our Price: $15.39 [Add to Cart]


]]> https://www.trailer.parts/10-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5461.html This product is a 10 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 10 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 10 inch Hot-D...[Read More]
Our Price: $15.39 [Add to Cart]


]]> This product is a 10 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 10 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 10 inch Hot-Dipped Galvanized bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 10 inch L-Shape Galvanized Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
Choosing Hot-Dipped Galvanized L-Shape Bunk Brackets ensures a strong and sturdy corrosion resistant bunk bracket. Keep in mind that replacing bunk brackets typically also means your will be needing additional U-Bolts for mounting the new Bunk Brackets, and also bolts to re-bolt the bunk boards into the Bunk Brackets. These are both available on our website!
If you are mounting this 10 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct Hot-Dipped Galvanized U-Bolt is Galvanized U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Stainless Steel and will NEVER RUST!
In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Boat Trailer Bolts.
These bunk brackets typically are replaced in pairs, so keep that in mind!


L Type Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the L Type Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.

]]> <![CDATA[12 inch Bunk Bracket Galvanized L-Type for Boat Trailer Bunk Boards]]> https://www.trailer.parts/12-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5462.html Wed, 7 Oct 2026 00:00:00 EST This product is a 12 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 12 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 12 inch Hot-D...[Read More]
Our Price: $18.21 [Add to Cart]


]]> https://www.trailer.parts/12-inch-Bunk-Bracket-Galvanized-L-Type-for-Boat-Trailer-Bunk-Boards_p_5462.html This product is a 12 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 12 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 12 inch Hot-D...[Read More]
Our Price: $18.21 [Add to Cart]


]]> This product is a 12 inch Hot-Dipped Galvanized L-Shaped Bunk Bracket. This Bunk Bracket measures 12 inches tall and 5 inches wide. The Holes you see on the longer section and foot section are 1/2 inch in diameter. The thickness of this 12 inch Hot-Dipped Galvanized bunk bracket is 1/4 inch. The foot holes are designed specially to be mounted on a 3 inch wide cross member. In most, if not all cases the cross-member would measure 3 inch by 3 inch. This style bunk bracket is used to mount bunk boards vertically to support the hull of the boat.
If you are deciding on this 12 inch L-Shape Galvanized Bunk Bracket you are either replacing existing rusted bunk brackets or switching the style of bunks on your boat trailer.
Choosing Hot-Dipped Galvanized L-Shape Bunk Brackets ensures a strong and sturdy corrosion resistant bunk bracket. Keep in mind that replacing bunk brackets typically also means your will be needing additional U-Bolts for mounting the new Bunk Brackets, and also bolts to re-bolt the bunk boards into the Bunk Brackets. These are both available on our website!
If you are mounting this 12 inch L Shape Bunk bracket to a 3 inch by 3 inch cross-member, the correct Hot-Dipped Galvanized U-Bolt is Galvanized U-Bolt 1/2 inch x 3 inch x 4 5/16 inch. This size U-Bolt will ensure the proper length of threads. Be sure to double check the U-Bolt dimension you require. These U-Bolts are also available in Stainless Steel and will NEVER RUST!
In addition, you will need through bolts to re-mount your bunk boards. Check the length bolt you need. We have these available in both Stainless Steel and Zinc plated, you will need a 1/2 inch diameter bolt. Boat Trailer Bolts.
These bunk brackets typically are replaced in pairs, so keep that in mind!


L Type Bunk Bracket Kit To Do List:
Boat Trailer U-Bolts are used to mount your Swivel Top Bunk Bracket to your trailers Cross Member, determined by measuring the width and height, and selecting between galvanized or stainless steel hardware.
Boat Trailer Bolts are used to secure your boat trailers bunk boards to the L Type Bunk Bracket, available in Stainless Steel and Galvanized.
Boat Trailer Carpet is used to wrap your trailers bunk boards, protecting your boats hull and providing a great surface for loading and unloading, available in different widths for all bunk board sizes.

]]> <![CDATA[5 inch Black Rubber spool Roller 1/2 Bore]]> https://www.trailer.parts/5-inch-Black-Rubber-spool-Roller-12-Bore_p_5565.html Wed, 7 Oct 2026 00:00:00 EST This 5 inch Black Rubber Roller has a 1/2 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 6.5 inch long 1/2 inch Diameter. This roller will mount on brackets that bolt to the cross members of your boat trailer. Commonly y...[Read More]
Our Price: $16.01 [Add to Cart]


]]> https://www.trailer.parts/5-inch-Black-Rubber-spool-Roller-12-Bore_p_5565.html This 5 inch Black Rubber Roller has a 1/2 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 6.5 inch long 1/2 inch Diameter. This roller will mount on brackets that bolt to the cross members of your boat trailer. Commonly y...[Read More]
Our Price: $16.01 [Add to Cart]


]]> This 5 inch Black Rubber Roller has a 1/2 inch inner diameter that would typically mount on a Zinc Plated Roller Shaft 6.5 inch long 1/2 inch Diameter. This roller will mount on brackets that bolt to the cross members of your boat trailer. Commonly you can secure this roller to the shaft using 1/2 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts. These pal nuts hammer onto the shaft and secure it tightly. Heavy Duty Rubber and the Spool design of the roller allow for easy loading and unloading of the boat. This design will work on many types of boat hulls.
MADE IN THE USA!
]]> <![CDATA[Bunk Bracket Replacement Swivel Top for Adjustable Bolster Brackets]]> https://www.trailer.parts/Bunk-Bracket-Replacement-Swivel-Top-for-Adjustable-Bolster-Brackets_p_5575.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Swivel Top for the Swiveling Bunk Bracket. This Hot-Dipped Galvanized Swivel Top Bunk Bracket Can Easily replace rusted out Swivel Tops on your Bunk Brackets. These Swivel Tops are meant for mounting 2 inch by 4 inch B...[Read More]
Our Price: $3.82 [Add to Cart]


]]> https://www.trailer.parts/Bunk-Bracket-Replacement-Swivel-Top-for-Adjustable-Bolster-Brackets_p_5575.html This is a Hot-Dipped Galvanized Swivel Top for the Swiveling Bunk Bracket. This Hot-Dipped Galvanized Swivel Top Bunk Bracket Can Easily replace rusted out Swivel Tops on your Bunk Brackets. These Swivel Tops are meant for mounting 2 inch by 4 inch B...[Read More]
Our Price: $3.82 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Swivel Top for the Swiveling Bunk Bracket. This Hot-Dipped Galvanized Swivel Top Bunk Bracket Can Easily replace rusted out Swivel Tops on your Bunk Brackets. These Swivel Tops are meant for mounting 2 inch by 4 inch Bunk Boards at a specified angle to support the hull of your boat. This Hot-Dipped Galvanized Swivel Top Bunk Bracket is made of 1/8 inch steel, measures 3 1/2 inches long x 2 inches (side with 1 hole) x 1 1/2 inches (side with 2 holes). The Top holes measure 2 inches center to center.

To Mount this Bunk Bracket Swivel you would commonly use a 7/16 inch Diameter by 1 1/4 inch Long Zinc Plated Bolt to mount it to your bunk bracket. Also, you can use 5/16 x 1 1/2 Galvanized Lag Screws for Swivel Top Bunk Bracket (2) to mount your bunk board to the swivel top!

This replacement bracket can be used on the standard swivel top style of bolster bracket as well as the 2" x 2" style of bracket that you may have.
]]> <![CDATA[8 inch Black Rubber Keel Boat Roller ]]> https://www.trailer.parts/8-inch-Black-Rubber-Keel-Boat-Roller-_p_5430.html Wed, 7 Oct 2026 00:00:00 EST This 8 inch Black Rubber Keel Roller is designed for your Boat Trailer and MADE IN THE USA, these rubber rollers will mount along the center-line of your boat trailer, typically on 8 inch Galvanized Roller Bracket and will provide support for your bo...[Read More]
Our Price: $27.05 [Add to Cart]


]]> https://www.trailer.parts/8-inch-Black-Rubber-Keel-Boat-Roller-_p_5430.html This 8 inch Black Rubber Keel Roller is designed for your Boat Trailer and MADE IN THE USA, these rubber rollers will mount along the center-line of your boat trailer, typically on 8 inch Galvanized Roller Bracket and will provide support for your bo...[Read More]
Our Price: $27.05 [Add to Cart]


]]> This 8 inch Black Rubber Keel Roller is designed for your Boat Trailer and MADE IN THE USA, these rubber rollers will mount along the center-line of your boat trailer, typically on 8 inch Galvanized Roller Bracket and will provide support for your boat to allow easier loading and unloading. Keel Rollers are essential for the trailer, loading, and unloading process. They Support the hull, guide the boat, and furthermore protect it from damage.
These keel rollers are most commonly mounted on the trailers cross-members in front and behind the trailers axles.
As pictured, this Yates 8 inch Rubber Keel Roller has a 5/8 inch inner bore for mounting with a Stainless Steel Roller Shaft 9.5 inch long or Zinc Plated Roller Shaft 9.5 inch long 5/8 inch Diameter and secured in with 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts into the roller bracket. You would need to select the appropriate Boat Trailer U-Bolts or Trailer Bolts to mount the replacement assembly to your trailers cross-member.
Tapered Tapered design for optimal hull support
Makes launching a breeze
]]> <![CDATA[2.5 inch Rubber Roller End Cap with 5/8 inch Inner Bore]]> https://www.trailer.parts/25-inch-Rubber-Roller-End-Cap-with-58-inch-Inner-Bore_p_5429.html Wed, 7 Oct 2026 00:00:00 EST This 2.5 inch Rubber Coned End cap is designed to mount on either end of a 12 inch Black Rubber Straight Roller 5/8 inner diameter. These end caps provide extra protection for your boat hull. They typically mount on the outside of a roller bracket on...[Read More]
Our Price: $6.95 [Add to Cart]


]]> https://www.trailer.parts/25-inch-Rubber-Roller-End-Cap-with-58-inch-Inner-Bore_p_5429.html This 2.5 inch Rubber Coned End cap is designed to mount on either end of a 12 inch Black Rubber Straight Roller 5/8 inner diameter. These end caps provide extra protection for your boat hull. They typically mount on the outside of a roller bracket on...[Read More]
Our Price: $6.95 [Add to Cart]


]]> This 2.5 inch Rubber Coned End cap is designed to mount on either end of a 12 inch Black Rubber Straight Roller 5/8 inner diameter. These end caps provide extra protection for your boat hull. They typically mount on the outside of a roller bracket on the same shaft as the straight roller. Each Rubber End Cap would take up 1 1/2 inches of the shaft. These rollers and end caps are common mounted on a 12 inch Galvanized Roller Bracket with the appropriate roller shaft length.

MADE IN THE USA!
]]> <![CDATA[10 inch Black Rubber Keel Boat Roller ]]> https://www.trailer.parts/10-inch-Black-Rubber-Keel-Boat-Roller-_p_5428.html Wed, 7 Oct 2026 00:00:00 EST Set up your boat trailer with this Heavy Duty 10 inch Keel Boat Trailer Roller, these black rubber boat rollers are extremely common. They are typically installed along the keel of boats as a means of protecting the hull, and allowing easy loading an...[Read More]
Our Price: $28.14 [Add to Cart]


]]> https://www.trailer.parts/10-inch-Black-Rubber-Keel-Boat-Roller-_p_5428.html Set up your boat trailer with this Heavy Duty 10 inch Keel Boat Trailer Roller, these black rubber boat rollers are extremely common. They are typically installed along the keel of boats as a means of protecting the hull, and allowing easy loading an...[Read More]
Our Price: $28.14 [Add to Cart]


]]> Set up your boat trailer with this Heavy Duty 10 inch Keel Boat Trailer Roller, these black rubber boat rollers are extremely common. They are typically installed along the keel of boats as a means of protecting the hull, and allowing easy loading and unloading.
5/8 inner Bore
Made of Heavy Duty Black Rubber
Makes Launching Your Boat a Breeze
Tapered Design for Optimal Hull Support
As pictured, commonly mounts inside a 10 inch Galvanized Roller Bracket with Stainless Steel Roller Shaft 11.5 inch long and 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts securing the whole assembly together. You will need to determine the correct size Boat Trailer U-Bolts or Trailer Bolts to then mount the entire assembly to the trailers cross-member.
]]> <![CDATA[12 inch Black Rubber Keel Roller for Boat Trailer ]]> https://www.trailer.parts/12-inch-Black-Rubber-Keel-Roller-for-Boat-Trailer-_p_5426.html Wed, 7 Oct 2026 00:00:00 EST Set up your boat trailer with this Heavy Duty 12 inch Keel Roller, these black rubber rollers are extremely common installed along the keel of boats as a means of protecting the hull, and allowing easy loading and unloading. 5/8 inner Bore3.5 diamete...[Read More]
Our Price: $31.75 [Add to Cart]


]]> https://www.trailer.parts/12-inch-Black-Rubber-Keel-Roller-for-Boat-Trailer-_p_5426.html Set up your boat trailer with this Heavy Duty 12 inch Keel Roller, these black rubber rollers are extremely common installed along the keel of boats as a means of protecting the hull, and allowing easy loading and unloading. 5/8 inner Bore3.5 diamete...[Read More]
Our Price: $31.75 [Add to Cart]


]]> Set up your boat trailer with this Heavy Duty 12 inch Keel Roller, these black rubber rollers are extremely common installed along the keel of boats as a means of protecting the hull, and allowing easy loading and unloading.
5/8 inner Bore
3.5" diameter
Made of Heavy Duty Black Rubber
Makes Launching Your Boat a Breeze
Tapered Design for Optimal Hull Support

As pictured, commonly mounts inside a 12 inch Galvanized Keel Roller Bracket for Boat Trailer with Stainless Steel Roller Shaft 13.5 inch long 5/8 diameter and 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts securing the whole assembly together. We also have roller shafts available in Zinc Plated. This assembly is then either bolted or U-bolt to the trailers cross-member. Measure the Trailer Bolts or Boat Trailer U-Bolts you need and select from Galvanized or Stainless Steel to complete your arrangement and get that boat trailer back together!
]]> <![CDATA[Dutton-Lainson Replacement Boat Trailer Winch Handle 7 inch Handle]]> https://www.trailer.parts/Dutton-Lainson-Replacement-Boat-Trailer-Winch-Handle-7-inch-Handle_p_5415.html Wed, 7 Oct 2026 00:00:00 EST Replacement Winch Handle for Dutton-Lainson Winches Fits DL600A, DL900A, DL1100A, DL1300A winch models Ergonomic 7 inch handle Zinc Plated TUFFPLATE Finish to keep rust away! MADE IN THE USA! ...[Read More]
Our Price: $13.93 [Add to Cart]


]]> https://www.trailer.parts/Dutton-Lainson-Replacement-Boat-Trailer-Winch-Handle-7-inch-Handle_p_5415.html Replacement Winch Handle for Dutton-Lainson Winches Fits DL600A, DL900A, DL1100A, DL1300A winch models Ergonomic 7 inch handle Zinc Plated TUFFPLATE Finish to keep rust away! MADE IN THE USA! ...[Read More]
Our Price: $13.93 [Add to Cart]


]]> Replacement Winch Handle for Dutton-Lainson Winches
Fits DL600A, DL900A, DL1100A, DL1300A winch models
Ergonomic 7 inch handle
Zinc Plated TUFFPLATE Finish to keep rust away!
MADE IN THE USA!
]]> <![CDATA[2 Speed Dutton-Lainson Replacement Boat Trailer Winch Handle]]> https://www.trailer.parts/2-Speed-Dutton-Lainson-Replacement-Boat-Trailer-Winch-Handle_p_5414.html Wed, 7 Oct 2026 00:00:00 EST Replacement Winch Handle for Dutton-Lainson Winches Fits 2 Speed Winches with Quick Release Handle Application Fits DL2000A, DL2500A, and DL3200A models The ergonomic handle grip gives the user the best cranking motion with comfort Zinc Plated TUFFPL...[Read More]
Our Price: $17.92 [Add to Cart]


]]> https://www.trailer.parts/2-Speed-Dutton-Lainson-Replacement-Boat-Trailer-Winch-Handle_p_5414.html Replacement Winch Handle for Dutton-Lainson Winches Fits 2 Speed Winches with Quick Release Handle Application Fits DL2000A, DL2500A, and DL3200A models The ergonomic handle grip gives the user the best cranking motion with comfort Zinc Plated TUFFPL...[Read More]
Our Price: $17.92 [Add to Cart]


]]> Replacement Winch Handle for Dutton-Lainson Winches
Fits 2 Speed Winches with Quick Release Handle Application
Fits DL2000A, DL2500A, and DL3200A models
The ergonomic handle grip gives the user the best cranking motion with comfort
Zinc Plated TUFFPLATE Finish to keep the rust away!
MADE IN THE USA!
]]> <![CDATA[5 inch Galvanized Keel Roller Bracket for Boat Trailer]]> https://www.trailer.parts/5-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer_p_5412.html Wed, 7 Oct 2026 00:00:00 EST 5 inch Hot-Dipped Galvanized Roller Brackets that fits 5 inch Keel Rollers with slotted so you can adjust the bracket to the appropriate height. Will fit on cross members up to 4 inches high, these roller brackets cant be mounting on boat trailers to...[Read More]
Our Price: $17.32 [Add to Cart]


]]> https://www.trailer.parts/5-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer_p_5412.html 5 inch Hot-Dipped Galvanized Roller Brackets that fits 5 inch Keel Rollers with slotted so you can adjust the bracket to the appropriate height. Will fit on cross members up to 4 inches high, these roller brackets cant be mounting on boat trailers to...[Read More]
Our Price: $17.32 [Add to Cart]


]]> 5 inch Hot-Dipped Galvanized Roller Brackets that fits 5 inch Keel Rollers with slotted so you can adjust the bracket to the appropriate height. Will fit on cross members up to 4 inches high, these roller brackets cant be mounting on boat trailers to assist in loading and unloading, for the appropriate roller select 5 inch Black Rubber Keel Boat Roller.These rollers are commonly mounted into the roller bracket assembly with a Stainless Steel Roller Shaft 6.5 inch long or Zinc Plated Roller Shaft 6.5 inch long 5/8 inch Diameter and secures with 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts. Select the appropriate sized U-Bolt for Replacement from Boat Trailer U-Bolts. Typically these will mount on a square trailer cross member. ]]> <![CDATA[8 inch Galvanized Keel Roller Bracket for Boat Trailer]]> https://www.trailer.parts/8-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer_p_5411.html Wed, 7 Oct 2026 00:00:00 EST This 8 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 8 inch Keel or Straight Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. To create the a...[Read More]
Our Price: $19.63 [Add to Cart]


]]> https://www.trailer.parts/8-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer_p_5411.html This 8 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 8 inch Keel or Straight Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. To create the a...[Read More]
Our Price: $19.63 [Add to Cart]


]]> This 8 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 8 inch Keel or Straight Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. To create the assembly shown in the picture. Check out the 8 inch Stoltz Keel Roller or 8 inch Black Rubber Keel Boat Roller to select a replacement size. We have Stainless Steel Roller Shaft 9.5 inch long and Zinc Plated Boat Trailer Roller Shaft 9.5 inch long 5/8 inch Diameter to mount the new roller into the roller bracket. Use 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts to secure the roller onto the roller shaft.
Slotted for adjustments to fit crossmembers up to 4 inches Tall, the U-Bolts typically for a 3 inch x 3 inch cross member are 1/2 inch x 3 inch x 4 5/16 available above in both Hot-Dipped Galvanized or Stainless Steel. Check out our Boat Trailer U-Bolts and Trailer Bolts for additional sizes you may need for mounting your roller bracket.
Also adjust the height of the roller to raise or lower for best positioning
]]> <![CDATA[10 inch Galvanized Keel Roller Bracket for Boat Trailer ]]> https://www.trailer.parts/10-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer-_p_5410.html Wed, 7 Oct 2026 00:00:00 EST This 10 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 10 inch Keel Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. To create the assembly sh...[Read More]
Our Price: $22.01 [Add to Cart]


]]> https://www.trailer.parts/10-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer-_p_5410.html This 10 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 10 inch Keel Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. To create the assembly sh...[Read More]
Our Price: $22.01 [Add to Cart]


]]> This 10 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 10 inch Keel Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. To create the assembly shown in the picture, Check out the 10 inch Stoltz Keel Roller or 10 inch Black Rubber Keel Boat Roller to select a replacement size. We have Stainless Steel Roller Shaft 11.5 inch long and Zinc Plated Boat Trailer Roller Shaft 11 inch long 5/8 in Diameter to mount the new roller into the roller bracket. Use 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts to secure the roller onto the roller shaft.
Slotted for adjustments to fit crossmembers up to 4 inches Tall, the U-Bolts typically for a 3 inch x 3 inch cross member are 1/2 inch x 3 inch x 4 5/16 available above in both Hot-Dipped Galvanized or Stainless Steel. Check out our selection of Boat Trailer U-Bolts and Trailer Bolts if you are needing a different dimension u-bolt or bolt for mounting your roller bracket assembly.
Also adjust the height of the roller to raise or lower for best positioning
]]> <![CDATA[12 inch Galvanized Keel Roller Bracket for Boat Trailer]]> https://www.trailer.parts/12-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer_p_5409.html Wed, 7 Oct 2026 00:00:00 EST This 12 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 12 inch Keel or Straight Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. You will see ...[Read More]
Our Price: $24.28 [Add to Cart]


]]> https://www.trailer.parts/12-inch-Galvanized-Keel-Roller-Bracket-for-Boat-Trailer_p_5409.html This 12 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 12 inch Keel or Straight Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. You will see ...[Read More]
Our Price: $24.28 [Add to Cart]


]]> This 12 inch Hot-Dipped Galvanized Roller Bracket is designed to fit 12 inch Keel or Straight Rollers . You will commonly see these mounted to cross-members along the center line of the boat, both towards the rear and front of the boat. You will see a picture of what this bracket could look like once mounted!
Check out the 12 inch Stoltz Keel Roller or 12 inch Black Rubber Keel Roller for Boat Trailer to select a replacement size. We have Stainless Steel Roller Shaft 13.5 inch long and Zinc Plated Roller Shaft 13.5 in long 5/8 inch Diameter to mount the new roller into the roller bracket. Use 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts to secure the roller onto the roller shaft.
Slotted for adjustments to fit cross members up to 4 inches Tall, the U-Bolts typically for a 3 inch x 3 inch cross member are 1/2 inch x 3 inch x 4 5/16 available above in both Hot-Dipped Galvanized or Stainless Steel. If you are needing a different size check out the Boat Trailer U-Bolts and Boat Trailer Bolts.
Also adjust the height of the roller to raise or lower for best positioning

]]> <![CDATA[5 1/4 inch Stoltz Keel Roller for Boat Trailer ]]> https://www.trailer.parts/5-14-inch-Stoltz-Keel-Roller-for-Boat-Trailer-_p_5392.html Wed, 7 Oct 2026 00:00:00 EST This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 5 1/2 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid dis...[Read More]
Our Price: $21.08 [Add to Cart]


]]> https://www.trailer.parts/5-14-inch-Stoltz-Keel-Roller-for-Boat-Trailer-_p_5392.html This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 5 1/2 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid dis...[Read More]
Our Price: $21.08 [Add to Cart]


]]>

This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 5 1/2 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast "poor quality" poly rollers. Anti U-V Formulas prevent rapid discoloration, and any discoloration that will occur over time is purely visual and does not effect the rollers ability to function and prevent marking, meaning this roller will hold stronger longer. Stoltz Rollers will not mark up your boat! These rollers are the real deal! Stoltz Rollers do not have a separate bushings that can come dis-lodged or dry out and crack, the inner sleeve is aluminum and is ideal for supporting and allowing the roller to spin. It is important that the other thing to worry about is a rusting roller shaft, which is why we have them available in Stainless Steel!

This 5/8" diameter by 5 1/4 inch long Stoltz Poly Keel Roller is designed to assist you in loading the boat onto the trailer, to help give you that extra push and line up your boat.

Rollers in general are near essential to the loading and unloading process. Not only can they ease the process, but they also protect your boat from impacting the trailer at crucial points. Trailer Rollers are placed at important points on your boat trailers cross-member, typically along the center-line of the trailer. These rollers prevent damage to the boat and assist in support of the boats hull while trailering, loading, and unloading.
Typically, a keel roller mounts inside of a bracket, often referred to as a roller bracket. This roller would have a shaft running through its center, with caps, pins, or nuts holding it in place. This assembly is they bolted or u-bolted to the trailers cross-member.
This is a solid Trailer Roller! Check out your arrangement, and the parts you will need to finish the project! Let us know if there is anything we can assist you with!
]]> <![CDATA[8 inch Stoltz Keel Roller for Boat Trailer ]]> https://www.trailer.parts/8-inch-Stoltz-Keel-Roller-for-Boat-Trailer-_p_5391.html Wed, 7 Oct 2026 00:00:00 EST This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 8 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid discolo...[Read More]
Our Price: $39.85 [Add to Cart]


]]> https://www.trailer.parts/8-inch-Stoltz-Keel-Roller-for-Boat-Trailer-_p_5391.html This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 8 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid discolo...[Read More]
Our Price: $39.85 [Add to Cart]


]]> This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 8 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast "poor quality" poly rollers. Anti U-V Formulas prevent rapid discoloration, and any discoloration that will occur over time is purely visual and does not effect the rollers ability to function and prevent marking, meaning this roller will hold stronger longer. Stoltz Rollers will not mark up your boat! These rollers are the real deal! Stoltz Rollers do not have a separate bushings that can come dis-lodged or dry out and crack, the inner sleeve is aluminum and is ideal for supporting and allowing the roller to spin. It is important that the other thing to worry about is a rusting roller shaft, which is why we have them available in Stainless Steel!

This 8 inch Stoltz Poly Keel Roller is designed to assist you in loading the boat onto the trailer, to help give you that extra push and line up your boat.

Rollers in general are near essential to the loading and unloading process. Not only can they ease the process, but they also protect your boat from impacting the trailer at crucial points. Trailer Rollers are placed at important points on your boat trailers cross-member, typically along the center-line of the trailer. These rollers prevent damage to the boat and assist in support of the boats hull while trailering, loading, and unloading.
Typically, a keel roller mounts inside of a bracket, often referred to as a roller bracket. This roller would have a shaft running through its center, with caps, pins, or nuts holding it in place. This assembly is they bolted or u-bolted to the trailers cross-member. Seen in this listing is a picture of a Stoltz Polyurethane Boat Trailer Roller fastened into a Galvanized Boat Trailer Roller Bracket by a Boat Trailer Roller Shaft. At the end , holding the Stoltz Keel Roller are 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts. This Assembly would then U-Bolt to the Boat Trailer Cross Members. Most often cross-members will measure 3 inch by 3 inch, which would require a U-Bolt measuring 1/2 inch x 3 inch x 4 5/16 inch. This 10 inch Stoltz Keel Roller would use a Stainless Steel Roller Shaft 9.5 inch long, 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts, 8 inch Galvanized Roller Bracket, and Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch (2) to complete the assembly!
This is a solid Trailer Roller! Check out your arrangement, and the parts you will need to finish the project! Let us know if there is anything we can assist you with!
]]> <![CDATA[10 inch Stoltz Keel Roller for Boat Trailer]]> https://www.trailer.parts/10-inch-Stoltz-Keel-Roller-for-Boat-Trailer_p_5390.html Wed, 7 Oct 2026 00:00:00 EST This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 10 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid discol...[Read More]
Our Price: $44.67 [Add to Cart]


]]> https://www.trailer.parts/10-inch-Stoltz-Keel-Roller-for-Boat-Trailer_p_5390.html This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 10 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid discol...[Read More]
Our Price: $44.67 [Add to Cart]


]]> This is a Stoltz Brand, MADE IN THE USA! Centering Keel Roller. This 10 inch Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast "poor quality" poly rollers. Anti U-V Formulas prevent rapid discoloration, and any discoloration that will occur over time is purely visual and does not effect the rollers ability to function and prevent marking, meaning this roller will hold stronger longer. Stoltz Rollers will not mark up your boat! These rollers are the real deal! Stoltz Rollers do not have a separate bushings that can come dis-lodged or dry out and crack, the inner sleeve is aluminum and is ideal for supporting and allowing the roller to spin. It is important that the other thing to worry about is a rusting roller shaft, which is why we have them available in Stainless Steel!

This 10 inch Stoltz Poly Keel Roller is designed to assist you in loading the boat onto the trailer, to help give you that extra push and line up your boat.

Rollers in general are near essential to the loading and unloading process. Not only can they ease the process, but they also protect your boat from impacting the trailer at crucial points. Trailer Rollers are placed at important points on your boat trailers cross-member, typically along the center-line of the trailer. These rollers prevent damage to the boat and assist in support of the boats hull while trailering, loading, and unloading.
Typically, a keel roller mounts inside of a bracket, often referred to as a roller bracket. This roller would have a shaft running through its center, with caps, pins, or nuts holding it in place. This assembly is they bolted or u-bolted to the trailers cross-member. Seen in this listing is a picture of a Stoltz Polyurethane Boat Trailer Roller fastened into a Galvanized Boat Trailer Roller Bracket by a Boat Trailer Roller Shaft. At the end , holding the Stoltz Keel Roller are 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts. This Assembly would then U-Bolt to the Boat Trailer Cross Members. Most often cross-members will measure 3 inch by 3 inch, which would require a U-Bolt measuring 1/2 inch x 3 inch x 4 5/16 inch. This 10 inch Stoltz Keel Roller would use a Stainless Steel Roller Shaft 11.5 inch long, 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts, 10 inch Galvanized Roller Bracket, and Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch (2) to complete the assembly!
This is a solid Trailer Roller! Check out your arrangement, and the parts you will need to finish the project! Let us know if there is anything we can assist you with!
]]> <![CDATA[12 inch Stoltz Straight Roller for Boat Trailer]]> https://www.trailer.parts/12-inch-Stoltz-Straight-Roller-for-Boat-Trailer_p_5389.html Wed, 7 Oct 2026 00:00:00 EST This is a Stoltz Brand, MADE IN THE USA! Keel Roller. This 12 inch Straight Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid discolo...[Read More]
Our Price: $41.53 [Add to Cart]


]]> https://www.trailer.parts/12-inch-Stoltz-Straight-Roller-for-Boat-Trailer_p_5389.html This is a Stoltz Brand, MADE IN THE USA! Keel Roller. This 12 inch Straight Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast poor quality poly rollers. Anti U-V Formulas prevent rapid discolo...[Read More]
Our Price: $41.53 [Add to Cart]


]]> This is a Stoltz Brand, MADE IN THE USA! Keel Roller. This 12 inch Straight Stoltz Keel Roller is made form the Highest Quality Polyurethane that has been tested and proven to outlast "poor quality" poly rollers. Anti U-V Formulas prevent rapid discoloration, and any discoloration that will occur over time is purely visual and does not effect the rollers ability to function and prevent marking, meaning this roller will hold stronger longer. Stoltz Rollers will not mark up your boat! These rollers are the real deal! Stoltz Rollers do not have a separate bushings that can come dis-lodged or dry out and crack, the inner sleeve is aluminum and is ideal for supporting and allowing the roller to spin. It is important that the other thing to worry about is a rusting roller shaft, which is why we have them available in Stainless Steel!

This 12 inch Stoltz Poly Keel Straight Roller is designed to assist you in loading the boat onto the trailer, to help give you that extra push and line up your boat.

Rollers in general are near essential to the loading and unloading process. Not only can they ease the process, but they also protect your boat from impacting the trailer at crucial points. Trailer Rollers are placed at important points on your boat trailers cross-member, typically along the center-line of the trailer. These rollers prevent damage to the boat and assist in support of the boats hull while trailering, loading, and unloading.
Typically, a keel roller mounts inside of a bracket, often referred to as a roller bracket. This roller would have a shaft running through its center, with caps, pins, or nuts holding it in place. This assembly is they bolted or u-bolted to the trailers cross-member. Seen in this listing is a picture of a Stoltz Polyurethane Boat Trailer Roller fastened into a Galvanized Boat Trailer Roller Bracket by a Galvanized Boat Trailer Roller Bracket. At the end , holding the Stoltz Keel Roller are 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts. This Assembly would then U-Bolt to the Boat Trailer Cross Members. Most often cross-members will measure 3 inch by 3 inch, which would require a U-Bolt measuring 1/2 inch x 3 inch x 4 5/16 inch. This 12 inch Stoltz Straight Boat Keel Roller would use a Stainless Steel Boat Trailer Roller Shaft 13.5 inch long 5/8 diameter, 5/8 inch Zinc Plated Boat Trailer Roller Shaft Pal Nuts, 12 inch Galvanized Keel Roller Bracket for Boat Trailer, and Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch (2) to complete the assembly!
This is a solid Trailer Roller! Check out your arrangement, and the parts you will need to finish the project! Let us know if there is anything we can assist you with!
]]> <![CDATA[Galvanized U-Bolt 1/2 inch x 3 inch x 4 5/16 inch for Boat Trailer]]> https://www.trailer.parts/Galvanized-U-Bolt-12-inch-x-3-inch-x-4-516-inch-for-Boat-Trailer_p_5656.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot Dipped Galvanized U-bolt measuring 1/2 x 3 1/16 x 4 5/16, Used to hold on various brackets on boat and utility trailers. Includes galvanized nuts, lock washers, and flat washers. This Size U-Bolt is most commonly see to mount either Bun...[Read More]
Our Price: $4.63 [Add to Cart]


]]> https://www.trailer.parts/Galvanized-U-Bolt-12-inch-x-3-inch-x-4-516-inch-for-Boat-Trailer_p_5656.html This is a Hot Dipped Galvanized U-bolt measuring 1/2 x 3 1/16 x 4 5/16, Used to hold on various brackets on boat and utility trailers. Includes galvanized nuts, lock washers, and flat washers. This Size U-Bolt is most commonly see to mount either Bun...[Read More]
Our Price: $4.63 [Add to Cart]


]]> This is a Hot Dipped Galvanized U-bolt measuring 1/2" x 3 1/16" x 4 5/16", Used to hold on various brackets on boat and utility trailers. Includes galvanized nuts, lock washers, and flat washers. This Size U-Bolt is most commonly see to mount either Bunk Brackets to a 3 inch by 3 inch cross member or to mount a 3 inch by 3 inch cross member to an I-Beam trailer Frame.

Specs:

Finish: Hot Dipped Galvanized

Thread Size: ½-13

Inside Width: 3 1/16 inches

Inside Length: 4 5/16 inches

This U-Bolt size is the most commonly used boat trailer U-Bolt. The most common tubing that this U-Bolt would mount around would be 3" x 3" tubing. For example, using this U-Bolt with the Galvanized Vertical Bunk Brackets L Type or Swivel Top Boat Trailer Bunk Brackets would allow you to mount your bunk brackets to your trailers cross-member. In addition, this size U-Bolt would mount your Boat Trailer front V-Guide or Galvanized Boat Trailer Roller Brackets to your trailers cross-members.

]]> <![CDATA[Boat Trailer V-guide On for Boat Trailer Center V Support]]> https://www.trailer.parts/Boat-Trailer-V-guide-On-for-Boat-Trailer-Center-V-Support_p_5657.html Wed, 7 Oct 2026 00:00:00 EST This Hot Dipped Galvanized Boat Trailer V-guide on will help guide the bow of your boat to center up on your trailer. Rough Width from tip to tip is 42 inches. Made out of 1/8 inch thick galvanized steel- sleeved with 2 inch Pvc and caps- this v-guid...[Read More]
Our Price: $130.88 [Add to Cart]


]]> https://www.trailer.parts/Boat-Trailer-V-guide-On-for-Boat-Trailer-Center-V-Support_p_5657.html This Hot Dipped Galvanized Boat Trailer V-guide on will help guide the bow of your boat to center up on your trailer. Rough Width from tip to tip is 42 inches. Made out of 1/8 inch thick galvanized steel- sleeved with 2 inch Pvc and caps- this v-guid...[Read More]
Our Price: $130.88 [Add to Cart]


]]> This Hot Dipped Galvanized Boat Trailer V-guide on will help guide the bow of your boat to center up on your trailer. Rough Width from tip to tip is 42 inches. Made out of 1/8 inch thick galvanized steel- sleeved with 2 inch Pvc and caps- this v-guide will save you time when loading your boat on your trailer. The v- guide will attach to your trailers cross-members by using a hat bracket and two U-bolts. Use either the 2 inch Galvanized Boat Trailer Hat Bracket or the 2 inch Aluminum Boat Trailer Hat Bracket. Typically these mount on 3 inch by 3 inch Cross Beams towards the cross of the boat trailer. In that case, the correct size U-Bolt is a 1/2 inch by 3 inch by 4 5/16 inch, found here Boat Trailer U-Bolts.

]]> <![CDATA[Boat Trailer V-guide On Kit for Bow Support]]> https://www.trailer.parts/Boat-Trailer-V-guide-On-Kit-for-Bow-Support_p_5659.html Wed, 7 Oct 2026 00:00:00 EST This hot dipped galvanized boat trailer V-guide on will help guide the bow of your boat to center up on your trailer. Made out of 1/8 galvanized steel, sleeved with 2 inch pvc and caps, this v-guide will save you time when loading your boat on your t...[Read More]
Our Price: $144.82 [Add to Cart]


]]> https://www.trailer.parts/Boat-Trailer-V-guide-On-Kit-for-Bow-Support_p_5659.html This hot dipped galvanized boat trailer V-guide on will help guide the bow of your boat to center up on your trailer. Made out of 1/8 galvanized steel, sleeved with 2 inch pvc and caps, this v-guide will save you time when loading your boat on your t...[Read More]
Our Price: $144.82 [Add to Cart]


]]> This hot dipped galvanized boat trailer V-guide on will help guide the bow of your boat to center up on your trailer. Made out of 1/8 galvanized steel, sleeved with 2 inch pvc and caps, this v-guide will save you time when loading your boat on your trailer. Rough width from Tip to Tip is 42 inches. The v-guide will attach to your trailers cross-members by using a 2 inch galvanized hat bracket and two 1/2 in x 3 in x 4 5/16 in galvanized U-bolts that are included in this kit. If you do not currently have this assembly on your trailer, the correct location for it would be your forward most cross member.

We mostly see this item on trailers with a short cross member connecting the frame of the trailer together a couple feet before the winch post. In most cases, this would be a 3" x 3" straight galvanized or aluminum beam. In this kit, you have the correct hardware to complete the installation. When the U-Bolts are tightened down, the 2" x 2" galvanized tubing portion of the Bow Support becomes fixed.

Ideally, you want this V support to make contact with the hull of the boat when installing, but it is not necessary in every application. The amount of support and height level really depends upon your particular needs. We would suggest that you first install the v guide at a determined height. When you take your next boat trip, take note of the process of loading your boat. Do you need more height, or less height? The goal of this product is not only to help guide your boat towards the center of your trailer, but also help the bow of your boat reach the desired height to make contact with your winch stand. Their is not necessarily a correct adjustment rule standard, you simply have to test fit a height and adjust from their. Upon first use, take it slow, paying attention to the moment when your Bow Guide is contacted, to see the effect it has on the boat. At that point, decide if you need more or less support for the boat to reach the ideal loading position. Also, keep in mind that steeper ramps will change the dynamics of loading. It is always recommended to load your boat at a safe speed to prevent any damage to your gel coat.

]]> <![CDATA[Stainless Steel U-Bolt 1/2 inch x 3 inch x 4 5/16 inch Trailer U-Bolt]]> https://www.trailer.parts/Stainless-Steel-U-Bolt-12-inch-x-3-inch-x-4-516-inch-Trailer-U-Bolt_p_5662.html Wed, 7 Oct 2026 00:00:00 EST Stainless Steel U-bolt measuring 1/2 inch x 3 1/16 inch x 4 5/16 inch, Used to hold on various brackets on boat and utility trailers. Includes Stainless Steel nuts, Locking washers, and flat washers. Specs: Finish: Stainless Steel Thread Size: 1/2-13...[Read More]
Our Price: $6.17 [Add to Cart]


]]> https://www.trailer.parts/Stainless-Steel-U-Bolt-12-inch-x-3-inch-x-4-516-inch-Trailer-U-Bolt_p_5662.html Stainless Steel U-bolt measuring 1/2 inch x 3 1/16 inch x 4 5/16 inch, Used to hold on various brackets on boat and utility trailers. Includes Stainless Steel nuts, Locking washers, and flat washers. Specs: Finish: Stainless Steel Thread Size: 1/2-13...[Read More]
Our Price: $6.17 [Add to Cart]


]]> Stainless Steel U-bolt measuring 1/2 inch x 3 1/16 inch x 4 5/16 inch, Used to hold on various brackets on boat and utility trailers. Includes Stainless Steel nuts, Locking washers, and flat washers.

Specs:

Finish: Stainless Steel

Thread Size: 1/2-13

Inside Width: 3 1/16 inch

Inside Length: 4 5/16 inch

This U-Bolt size is the most commonly used boat trailer U-Bolt. The most common tubing that this U-Bolt would mount around would be 3" x 3" tubing. For example, using this U-Bolt with the Galvanized Vertical Bunk Brackets L Type or Swivel Top Boat Trailer Bunk Brackets would allow you to mount your bunk brackets to your trailers cross-member. In addition, this size U-Bolt would mount your Boat Trailer front V-Guide or Galvanized Boat Trailer Roller Brackets to your trailers cross-members.

Using this Stainless Steel U-bolt is ideal for aluminum trailer parts like cross members and Aluminum Vertical Bunk Brackets L Type.

]]> <![CDATA[Winch Seat for Boat Trailer Winch Stand with Roller]]> https://www.trailer.parts/Winch-Seat-for-Boat-Trailer-Winch-Stand-with-Roller_p_5663.html Wed, 7 Oct 2026 00:00:00 EST This hot dipped galvanized winch seat is perfect for quick an easy replacement of your worn or broken winch seat. Able to fit on a 2 inch wide or 3 inch wide winch post. This boat trailer winch seat also has multiple holes to fit many styles of winch...[Read More]
Our Price: $91.36 [Add to Cart]


]]> https://www.trailer.parts/Winch-Seat-for-Boat-Trailer-Winch-Stand-with-Roller_p_5663.html This hot dipped galvanized winch seat is perfect for quick an easy replacement of your worn or broken winch seat. Able to fit on a 2 inch wide or 3 inch wide winch post. This boat trailer winch seat also has multiple holes to fit many styles of winch...[Read More]
Our Price: $91.36 [Add to Cart]


]]> This hot dipped galvanized winch seat is perfect for quick an easy replacement of your worn or broken winch seat. Able to fit on a 2 inch wide or 3 inch wide winch post. This boat trailer winch seat also has multiple holes to fit many styles of winches. Also included with this winch seat is a 4 inch bow roller and end caps. The poly roller and end caps are held securely to the winch seat with a stainless steel bolt.

]]> <![CDATA[Boat Trailer Split Roller Bracket Right Side for Keel Rollers]]> https://www.trailer.parts/Boat-Trailer-Split-Roller-Bracket-Right-Side-for-Keel-Rollers_p_5684.html Wed, 7 Oct 2026 00:00:00 EST This is a Hot-Dipped Galvanized Right side of a Split roller bracket. This is just the left side, Typically you would have a left side and a right side, that together mount a keel roller to the cross-member of a trailer. The nice thing about split ro...[Read More]
Our Price: $8.67 [Add to Cart]


]]> https://www.trailer.parts/Boat-Trailer-Split-Roller-Bracket-Right-Side-for-Keel-Rollers_p_5684.html This is a Hot-Dipped Galvanized Right side of a Split roller bracket. This is just the left side, Typically you would have a left side and a right side, that together mount a keel roller to the cross-member of a trailer. The nice thing about split ro...[Read More]
Our Price: $8.67 [Add to Cart]


]]> This is a Hot-Dipped Galvanized Right side of a Split roller bracket. This is just the left side, Typically you would have a left side and a right side, that together mount a keel roller to the cross-member of a trailer. The nice thing about split roller brackets is they can be adjusted to accommodate different sided rollers by simply loosening the bolts. These split roller brackets are mount to a boat trailers cross-members using 1/2 inch Boat Trailer Bolts or Boat Trailer U-Bolts. Simply check the measurement of hardware that you will be needing and select from galvanized and stainless steel. Also, check out our Boat Trailer Rollers and Brackets section, which includes roller shafts and pal nuts for mounting whatever size roller you need. ]]>