Trailer.parts Brought to You By Out Of The Box Parts

0 item(s) • $0 View Cart
free shipping over $149

Trailer Axle Painted Steel with 5 Lug Hubs 3,500lb, 95 in Hub Face - 80 in Spring Center

 
143321  
OOTB Item Sku:
review
0
0
0
5
Trailer Axle Painted Steel with 5 Lug Hubs 3,500lb, 95 in Hub Face - 80 in Spring Center
Price:
$468.02
On sale:
$402.41
Out of Stock.
  • Description
This 3,500 lb black painted steel axle has a hub face measurement of 95 inches and features prepacked and greased painted idler hubs, ready to install and replace your old bent or broken axle! The axle features standard 4 hole brake flanges, allowing you to mount most brands of brakes, such as those made by Kodiak, Deemaxx, Tie Down, and Titan. The spindle of the axle includes a greaseable zerk fitting, allowing you to relubricate the bearings without needing to disassemble the hubs and pack the bearings by hand. You would need a replacement axle if you have noticed tread wear due to improper tire alignment, which is the result of a bent trailer spindle on one side. In addition, another common reason for axle damage results from overloading the trailer, which will result in noticing tread wear on the insides of both trailer tires. If your boat trailer experiences exposure to corrosive environments, rust damage is another possible culprit for axle replacement. This 3,500 lb Capacity Trailer Axle is made with 3/16" Steel Wall Thickness, measures 2 3/8" in diameter, and features #84 Spindles welded into the beam. This listing is for the axle beam and preinstalled hubs, but we carry all of the leaf springs and other components that you need to complete your trailer repair!

The black painted idler hubs on this 3,500 lb Axle have the following features:
 
Inner Bearing Surface: 1 3/8" (Bearing 68149)

Outer Bearing Surface: 1 1/16" (Bearing 44649)

Grease Seal: 1.72" Inner Diameter Grease Seal Surface

Hub Bolt Pattern: 5 lug on 4 1/2" Bolt Pattern fits most 5 bolt trailer wheels

Dust Caps: 1.98" Accu-lube style zinc-plated dust caps with a removable plug to access grease zerk fitting

This Listing is For a 95" Hub Face Axle that has the Spring Perches welded at 80". This 95-inch Measurement is also referred to as the Track Measurement, or Center of Tire Measurement. 

Specific Axle Specifications for this 3,500 lb Trailer Axle:

Hub Face: 95"
*Refers to the Outside Face of one Hub as it meets the wheel to the outside face of the opposing hub as it meets the wheel

Brake Flange Measurement: 89"
*Refers to the Outside of one Brake Flange to the outside of opposing brake flange

Overall Axle Length (Tip to Tip not including hubs and dust caps): 100"
*Refers to the tip of one side of axle spindle to the opposing tip

Camber: Cambered, Axle Camber is intended for use with Leaf springs mounted below the axle.

Spring Seat Location: Spring Seats are welded at 80", this would mean that your Center of Leaf Spring Measurement would be 80"

Related Items

Information
Categories