Replace the Axle, Leaf Springs, and hubs on
your trailer all at the same time with this Full Trailer Axle Suspension Assembly. The
73 inch Hub Face Trailer Axle has a standard 4 hole flange for brakes and comes with 25 ¼ inch
Double Eye Leaf Springs pre-installed with zinc plated U Bolts and U Bolt
Plates. This Trailer Axle Kit also features
5 lug (4 ½ inch bolt pattern) Standard Hubs and a 4 Hole Brake Flange so you
can install Trailer Disc Brakes.
Suretrac Trailer Axle Specifications:
3,500lb Capacity
73-inch Track/Hub Face Measurement (Outside of Hub To Outside of
Hub)
58-inch Spring Center Measurement (Center of Spring to Center of
Spring)
2 3/8 inch Diameter
Cambered
Greaseable Spindle
Standard 4-Hole Brake Flange for installing Trailer Disc Brakes
Brakes
Painted Steel Hub Specs
5 bolt 4.5 inch Bolt Pattern/Stud Spacing
1 3/8 inch inner bearing size (68149)
1 1/16 inch outer bearing size (44649)
1.98 inch Dust Cap (Included)
1.719 inch seal
Lug
Nuts Not Included
Leaf Spring Specifications
25 1/4 inch Double-Eye Spring
9/16 x 11/16 Spring Bushing (Included)
Requires (2) 9/16 inch Diameter
Spring Bolt (Not included)
1,750lbs, 4 Leaf-Spring
Underslung with Zinc Plated U Bolts