This square 440 left-hand LED boat trailer light is a submersible tail light replacement with great longevity and protection, perfect for your jet ski or boat trailer! The LED light is encased in a sealed hard plastic enclosure and is completely waterproof, so you can safely dunk this light into saltwater or freshwater at the boat ramp. The 440 light stud mounts to your trailer's driver-side rear light bracket, fitting brackets with stud holes measuring 2 inches apart on center. This LED light will be a great improvement over standard incandescent lights, the LEDs operate much more efficiently and have far greater longevity, so you won't have to deal with blown-out bulbs or broken filament again! The light carries out all of the functions that you need on your boat trailer, providing brake light, turn light, tail light, side marker light, and license tag light functions, while also acting as a rear and side marker reflector. The light wires to your trailer's wiring harness through its three-wire pigtail harness; the yellow wire is for the left-hand turn light, the brown wire is for the stop and tail light function, and the white wire is for the ground. The LEDs are covered by a lifetime warranty and the connection and wiring are covered by a 3-year limited warranty, so you can be sure that these lights are ready for whatever use you need on your boat trailer!
Features
- LED 440 Submersible Trailer Light Left Hand (Driver Side)
- 3-wire pigtail wiring for stop, tail, turn, and license tag light functions
- DOT compliant for automotive use (meets FMVSS 108 and CMVVSS 108 requirements)
- Lifetime warranty on LEDs, 3-year limited warranty on connections
Specifications
- Light Dimensions: 5 1/16 inch width, 4 9/16 inch height, 2 7/8 inch depth
- Mounting studs: 2 inches apart center-to-center
- Yellow Wire: Driver-side turn light, Brown Wire: Passenger side tail light, White Wire: Ground
- 12V Voltage
- Amp Draw: .25A Stop/Turn, .062A Marker
