This is a Hot Dipped Galvanized Boat Trailer Winch Post measuring 3 inches by 3 inches on the post tubing, with a length of 24 inches. This post is easy to install to your trailer, you will just need two U-Bolts and it will mount directly onto your 3-inch width trailer tongue. You might need a replacement winch post if your old post is rusting out or your bow roller or winch seat is not sitting in the right part of your trailer. This is the 24-inch Angled Model for this style of Trailer Winch Post. The base and support of this post are welded to the tubing to create a strong finished winch post stand and the full unit has a hot-dipped galvanized coating for corrosion resistance, so this post will work great for saltwater and freshwater boat trailers alike!
This galvanized steel winch post is typically paired with a Winch Seat, also referred to as a Winch Mount. The Winch Seat or Mount will attach to the Winch Post using U Bolts, and the post attaches to your trailer using a pair of 3 inch Wide U Bolts. The length of the U Bolts will depend on your trailer tongue's height. For a 3"x3" Trailer Tongue, you would typically use Galvanized 1/2" x 3" x 4 5/16" U Bolts; for a 3x4 trailer tongue, Galvanized 1/2" x 3" x 5 5/16" U-Bolts are preferred. To Mount a Winch Support to this post, the support would need to be able to have mounting holes positioned to mount to this 3-inch Wide Winch Post. Verify the hole spaces on the Winch Support you are looking at to make sure it will mount to this Winch Post before purchasing the parts to complete the winch area assembly. You can see our full selection of 1/2" Galvanized U Bolts on our store here.
- 11 gauge Hot Dipped Galvanized Steel Construction
- 3 U Bolt Mounting Plate for sturdy installation to a 3 inch Wide Trailer Tongue
- 24 inch Length
- 3" x 3" x 24" Post dimensions
- 20" from the top of post down to the trailer tongue.
- 1/2" diameter Mounting holes
- 11 Gauge Hot-Dipped Galvanized Steel Construction