This
is
a 20-inch Double Eye 3 Leaf Marine
Coated
Spring rated at
1850 lbs per spring, 3700 lbs
per pair. These
springs
are
commonly used on 3500 lb trailer axles. The Marine-Coated Finish
provides extra protection against corrosion and harsh
environments,
so these springs are perfect for use on saltwater
boat
trailers or utility trailers traveling
through
areas with a lot of salt or rain.
Spring
Specifications:
Center-of-eye
to center-of-eye is 20 inches (Free Length Measurement)
Free
Arch Measurement of 3 1/2 inches
1
3/4 inches Wide
Preinstalled
with 9/16” Bushings (1/2" bushings available with purchase)
These
springs can be used on either
square or round tubed
trailer axles installed
on boat
or land trailers. Only
the style of U-Bolts
required
to mount the spring to the axle would
disparate.
Check the condition of your U-Bolts as
well as
the required size and, if
needed, check
out
our
U-Bolt Kits, available
in Raw Steel, Hot-Dipped Galvanized, Stainless Steel, and Zinc pLated.
If
you are planning on replacing the spring
hangers and shackles, we
have single and double spring hanger kits available for Weld-On
assemblies (that
include all the necessary replacement hardware),
Galvanized Spring Sliders, and individual Raw Steel or Galvanized
spring hangers and shackles.
